Luminous Landscape Forum

Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: felix5616 on October 09, 2021, 11:57:23 am

Title: Canson Plantine Fibre and HP Z3200
Post by: felix5616 on October 09, 2021, 11:57:23 am

whan profiling Canson Plantine Fibre on an HP Z3200 what paper preset should I use when builing an ICC profile with the embedded spectrophotometer?

Title: Re: Canson Plantine Fibre and HP Z3200
Post by: deanwork on October 09, 2021, 04:11:03 pm

Fine Art Pearl less ink

You can get a good profile with “ more ink” but it tends to saturate the paper too much with ink when a lot of dark areas are used. The image tonality is ok but the paper tends to be wavy from over saturation. This is my experience.

John

Quote from: felix5616 on October 09, 2021, 11:57:23 am

whan profiling Canson Plantine Fibre on an HP Z3200 what paper preset should I use when builing an ICC profile with the embedded spectrophotometer?

Title: Re: Canson Plantine Fibre and HP Z3200
Post by: felix5616 on October 10, 2021, 10:13:20 pm

Thanks John

Title: Re: Canson Plantine Fibre and HP Z3200
Post by: kers on October 12, 2021, 04:40:49 am

you can also download the official canson Platine OMS . It works with 110 ink and 89 GE... (but based on what preset ? is not clear... )

In my experience the GE layer works well except for some colours for instance : dark blues... then you need tot use the spray;  could be HM protective spray