Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: Ryan Mack on January 23, 2021, 11:50:36 am
-
Hi all,
My young son has been designing his own Pokemon cards. I just finished printing a set of them for him on Ilford double sided lustre paper and the quality is actually surprisingly good. I trimmed them down to size on my rotatrim but I'm not sure how to round the corners. I suspect doing it by hand with scissors would not be consistent. I was thinking maybe if I made a steel template with a dremel then I could use a finer head on the dremel to shave down the corners to match the profile but that may leave the edge looking too rough. Any better ideas?
-
In woodworking I often use something like a can or a coin to describe the round corner.
I'd think a template, metal or wood with an X-acto knife would work well. But if doing lots of them I'd go with a real template that is easy to hold in place. Maybe double stick tape a piece of thin rubber on the bottom to hold the print in place.
-
Hi all,
My young son has been designing his own Pokemon cards. I just finished printing a set of them for him on Ilford double sided lustre paper and the quality is actually surprisingly good. I trimmed them down to size on my rotatrim but I'm not sure how to round the corners. I suspect doing it by hand with scissors would not be consistent. I was thinking maybe if I made a steel template with a dremel then I could use a finer head on the dremel to shave down the corners to match the profile but that may leave the edge looking too rough. Any better ideas?
Search for "Corner Cutter" or "Corner Rounder". Many cheap options.
-
Search for "Corner Cutter" or "Corner Rounder". Many cheap options.
I have a couple of these. You can also buy with several radii
Corner Cutter (https://www.amazon.co.uk/s?k=corner+cutter&adgrpid=52073485806&gclid=CjwKCAiAr6-ABhAfEiwADO4sfXYe4T4IDh7-0Kt6R64fqvBO8ZGYzejSFszi1GJAzoLaRO9KGESGhhoCK_8QAvD_BwE&hvadid=259086304780&hvdev=c&hvlocphy=1007200&hvnetw=g&hvqmt=e&hvrand=11190280456659219224&hvtargid=kwd-297755795258&hydadcr=28148_1821043&tag=googhydr-21&ref=pd_sl_7uy0u6afnw_e)
-
Wow, I love how the price range on corner cutters is from $5 to $2,400. I'm torn between the $12 Sunstar Kadomaru Pro (looks like cheap plastic) and the $50 one sold by Oregon Laminations Company (looks like more metal and can handle thicker media). Tempting to go all the way up to the $135 Akiles Diamond 1 that can handle a stack of paper though!