Luminous Landscape Forum

Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: dseelig on June 17, 2020, 03:38:01 pm

Title: HP Z 3200 printhead problem
Post by: dseelig on June 17, 2020, 03:38:01 pm

Said I needed new print heads so I got one still did not work turned off and on the machine got another new printhead still would not work saud th eprinthead still needs replacing. I can see one bad printehad new bit two? Help

Title: Re: HP Z 3200 printhead problem
Post by: kers on June 20, 2020, 12:36:00 pm

Quote from: dseelig on June 17, 2020, 03:38:01 pm

Said I needed new print heads so I got one still did not work turned off and on the machine got another new printhead still would not work saud th eprinthead still needs replacing. I can see one bad printehad new bit two? Help

please take a bit more time to make a good text that anyone will understand...

You replaced a faulty printhead with a new one and still it is seen as a faulty one- is that what you are saying?

Title: Re: HP Z 3200 printhead problem
Post by: enduser on June 20, 2020, 09:22:22 pm

It's often said with Designjet problems that full disconnection from the power source, including pulling the plug, will remove offending stray electrical charge. Then do a restart.  A cost free first option.

Title: Re: HP Z 3200 printhead problem
Post by: dseelig on June 22, 2020, 12:40:14 am

Yes twice I replaced the printhead and still saying it was no good . Will try unplugging and see if that helps thank you

Title: Re: HP Z 3200 printhead problem
Post by: dseelig on July 01, 2020, 08:46:10 pm

well turned out that all ink no matter which have to be at least 40 percnet filled. problem solved