Luminous Landscape Forum

Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: BobShaw on February 03, 2020, 04:37:06 pm

Title: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: BobShaw on February 03, 2020, 04:37:06 pm
So it has arrived.
The new X1D-50c firmware 1.24.0 contains key firmware improvements, including the following exciting new features:

Support for the new XCD 45P lens
Focus bracketing
Image rating in camera
An added 2/3 step for exposure bracketing

All great but I was hoping for the ability to swap the shutter and aperture wheels in Manual Mode like I could on the H series.
Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: Steve Hendrix on February 04, 2020, 03:39:15 pm
So it has arrived.
The new X1D-50c firmware 1.24.0 contains key firmware improvements, including the following exciting new features:

Support for the new XCD 45P lens
Focus bracketing
Image rating in camera
An added 2/3 step for exposure bracketing

All great but I was hoping for the ability to swap the shutter and aperture wheels in Manual Mode like I could on the H series.


The most interesting element for me is the focus bracketing.

Nice that it has the delay options (before starting or between shots, for strobe recycle). And that you can dictate the direction (toward or away from infinity).

Interesting that it does not allow you to specific a number of steps and instead gives you an assortment of somewhat vague settings (extra small, small, medium, large, extra large).

This is for X1D original, a future firmware will add it to X1D-II.


Steve Hendrix/CI
Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: BobShaw on February 04, 2020, 04:03:23 pm

The most interesting element for me is the focus bracketing.

Interesting that it does not allow you to specific a number of steps ....
I haven't tried it but you can specify from 2-1000


Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: Steve Hendrix on February 04, 2020, 04:36:12 pm
I haven't tried it but you can specify from 2-1000


Oh, you know I read right over that and spaced on it.

Yes, so custom input exists. In the other case, they are probably using the small, medium, large, etc. to assist a more accurate auto function.


Steve Hendrix/CI
Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: BobShaw on February 05, 2020, 11:42:10 pm
Just tried the Focus Bracketing.
Subject distance 700mm
10 steps at Medium towards infinity.
A shame it does not work tethered to Phocus.
Better still if Phocus put them together.
But anyway, possibilities.
Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: George_Cleansman on February 06, 2020, 12:48:27 am
Do we see an updated firmware with focus bracketing also for the H6D cameras? The electronic platforms of X1D and H6D cameras are almost the same.
Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: BobShaw on February 06, 2020, 05:29:18 pm
Do we see an updated firmware with focus bracketing also for the H6D cameras? The electronic platforms of X1D and H6D cameras are almost the same.
All you can do is ask for it.
I think that Hasselblad will be pretty "focussed" at the moment on products and features it has already promised.
Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: BAB on February 06, 2020, 09:06:28 pm
Hey Bob I’ve been asking for it for five years...don’t think they know how to do it. Hasselblad is a marketing company now sort of and they great at giving away cameras but that’s all.

Title: Re: X1D-50C FIRMWARE UPDATE 1.24.0
Post by: BobShaw on February 06, 2020, 09:45:28 pm
Hey Bob I’ve been asking for it for five years...don’t think they know how to do it. Hasselblad is a marketing company now sort of and they great at giving away cameras but that’s all.
Every company is a marketing company or they go out of business. Send a request direct to [email protected]

Here is an auto aligned and blended from the above.