Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: mdelrossi on January 10, 2019, 10:18:17 am
-
Picked up a Mamiya 105-210 ULD and a Fotodiox adapter. the problem is that it doesn't focus to infinity until i get to 140mm or so.
Is it the adapter?or do I have to send it in?
Any suggestions would be great.
thanks
mdr
-
similar problem here. I tried to attach a mamiya 35mm, 55mm and 150mm,
they all do not focus to infinity.
The adapter I used is a novoflex. I complained and they already sent a new one, but same result.
Now I ordered a Kipon adapter, but am afraid that it will not work either.
any ideas out there?
-
This post prompted me to check my Mamiya-Sekor 45mm f/2.8 N with the Fotodiox Pro adapter on the GFX-50S and it does focus to infinity, actually slightly past infinity.
-
That must be different problems. Mamiya 24 FE, 35, 50 Shift, 80, 200 APO etc ... reach with the Fotodiox Pro Adapter M645-GFX all perfectly infinite on the GFX.
If the Mamiya 105-210 does it only at the 140mm, I'll tap on another problem.
However, I noticed a very fluctuating quality in my Fotodiox adapters. Maybe that's one reason.
The best mechanical adapters with the lowest tolerances had Kipon until now.
Greeting Gerd
addendum:
My Mamiya lenses are all about infinity. That's right, because the material of the lenses expands at different temperatures.
In this respect, that must already be a very strong deviation on the adapter.
-
thank you Gerd,
I wait now for the ordered Kipon adapter, I will report then
greetings
Ekkehart
-
Well at least I'm in good company :-\
Was looking to use this as a long lens for landscape and architecture. Good thing I have the 110.