Pages: 1 [2]   Go Down

Author Topic: Monitor suggestions  (Read 2666 times)

kers

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4626
    • Pieter Kers
Re: Monitor suggestions
« Reply #20 on: November 19, 2026, 07:59:17 am »

any thoughts about the latest 6K monitors from LG and Asus?

LG Ultrafine 32U990A-S PC Monitor 6K 32 Inch

here is a dutch review also comparing other monitors...

https://tweakers.net/reviews/14032/lg-ultrafine-32u990a-scherp-scherm-met-apple-look.html
« Last Edit: November 19, 2026, 08:09:26 am by kers »
Logged

Czornyj

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2054
    • zarzadzaniebarwa.pl
Re: Monitor suggestions
« Reply #21 on: November 20, 2026, 07:00:51 am »

any thoughts about the latest 6K monitors from LG and Asus?
Recently I bought PE320QXT (at a promo for 890$).with the same 6K IPS Black panel. It's pure joy to use - display is perfectly linearized so you only have to set wtpt and create a profile. Gamut is extremely huge and covers both P3 and AdobeRGB, the backlight SPD looks like RGB LED. Improved bkpt with CR 2000:1 gives noticably nicer blacks, and combined with 600cd/m^2 max luminance provides a bit of "poor man's HDR". It has a pressure sensitive stylus so you can retouch photos on screen like in a Wacom Cintiq which is also a nice bonus. 6K with UI size at 3360x1890 and a sharpness of a scalpel is another level of comfort and I simply adore it. PE270XT is it's  27" twin. The only drawback is that glossy anti glare surface is not as effective at reflection reduction as in case of Retina, but I'm planning to put some better AG film on it.

My other bargain purchase was PE320QK X (for massive 740$ at a promo). I bought it out of curiosity, because in the past all OLED displays that I tested had always some irritating drawbacks - lack of uniformity and linearity, brightness pumping, color fringing, color tint at an angle etc. But this 4K QD-OLED is just a whole different animal. It can reach 250cd/m^2 100% white, so at normal SDR brightness there's no trace of pumping. Uniformity is jaw-dropping, noticably better that in IPS panels. With peak 1000cd/m^2 brighness and perfect OLED black you can work with HDR content - obviously it's not perfect and it pumps when the scene is very bright, but in average scenes it is similar to Retina XDR, but of course without any trace of mini LED halation. It also has glossy surface, but contrary to PE320QXT it has black hole like AG that to my bewilderment is even better than Retina. Considering jaw dropping quality at the ridiculously low price it's simply incredible bargain, that makes recent EIZOs IPS look shamelessly overpriced, outdated piece of junk.

It's only a shame that in all above cases hardware calibration software is virtually USELESS, BAD JOKE, and the profiles created automatically by MacOS from EDID information are just wrong, so I ended up calibrating it manually and profiling it with other software.
« Last Edit: November 20, 2026, 08:54:04 am by Czornyj »
Logged
Marcin Kałuża | [URL=http://zarzadzaniebarwa

kers

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4626
    • Pieter Kers
Re: Monitor suggestions
« Reply #22 on: November 21, 2026, 06:48:47 am »

Marcin, thank you for your thoughts much appreciated...
I need a 5 or 6K for I have a Mac that renders 5K and 6K better than 4K...
some questions, you might have an answer to;

In this Dutch test the LG 6K was within deltaE 3, but not better ( after a hardware calibration)
do you think that is good enough?
and
I have an old Colormunki; would that be good enough to measure these wide gamut screens?
« Last Edit: November 21, 2026, 07:10:57 am by kers »
Logged

Czornyj

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2054
    • zarzadzaniebarwa.pl
Re: Monitor suggestions
« Reply #23 on: November 21, 2026, 11:32:00 am »

Marcin, thank you for your thoughts much appreciated...
I need a 5 or 6K for I have a Mac that renders 5K and 6K better than 4K...
some questions, you might have an answer to;

In this Dutch test the LG 6K was within deltaE 3, but not better ( after a hardware calibration)
do you think that is good enough?
and
I have an old Colormunki; would that be good enough to measure these wide gamut screens?

They did calibration with different i1D3 and spectral characterisation than they used for validation, and validated the results with different target like TRC sRGB that doesn't really make sense. They also only validated calibrations with gamut limited to editing color spaces, and in such scenarios when gamut is limited by a simple 3x3 Matrix LUT there are always some small errors.

In practice it doesn't really matter - you can set or calibrate to native gamut, profile it and there will be virtually no errors at all. ColorMunki is not the best sensor for a backlight with such extremely spiky spectra, but a factory calibration of LG are usually very decent, and MacOS generates automatic profile from EDID information. I didn't test this particular model, but had couple of different 27-32" 4K LGs and as a rule of a thumb they were properly linearized to TRC ɣ2.2 so it’s virtually plug and play, and really nothing to worry about
« Last Edit: November 21, 2026, 11:58:37 am by Czornyj »
Logged
Marcin Kałuża | [URL=http://zarzadzaniebarwa
Pages: 1 [2]   Go Up