Hello,
Is anyone using Argyll CMS 3.4.0 (latest version to date Aug 2025)?
Chartread crashes for me as soon as I start to scan a row. It calibrates my i1Studio spectro, prompts to start the scan, beeps normally in response to triggering the instrument switch, then crashes several patches into the scan.
My equipment:
i1Studio spectrometer
iMac 2019 3.6 GHz 8-Core Intel Core i9
Radeon Pro Vega 48 8 GB
64 GB 2667 MHz DDR4
OS Sonoma 14.7.7 (23H723)
Below is a typical session - it never gets past the last line: "Raw Bands 24-33" at which point it's frozen -
I've emailed Graeme several times but haven't heard back.
I was able to find an archive of Argyll CMS 3.1.0 and that's working ok.
Has anyone else had any problem with 3.4.0?
richimac@RichiMacs-iMac desktop % chartread -v epson
Steps in each Pass = 14
Passes in each Strip = 7, 7, 7, 7, 7, 7, 1
Instrument Type: ColorMunki
Serial Number: 4009998
Firmware version: 512
Chip ID: 01-C7F8F81A0000F2
Version string: 'i1Studio FW V2.00 Build Nr. 1310'
Calibration Ver.: 6
Production No.: 205737
Set instrument sensor to calibration position,
and then hit any key to continue,
or hit Esc or Q to abort:
Calibration complete
Ready to read strip pass A
Press 'f' to move forward, 'b' to move back, 'n' for next unread,
'd' when done, Esc or 'q' to quit without saving.
Trigger instrument switch or any other key to start:
Raw Bands 24 - 33
Thanks,
Rich
