Luminous Landscape Forum

Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: Bonobo on October 06, 2009, 10:21:35 am

Title: Capture One problem.
Post by: Bonobo on October 06, 2009, 10:21:35 am

Im using Capture One on my MBP and keeping on getting this problem. Im running 4.8.3 DB version (not Pro) on a 2.4ghz dual core with 2 gigs of RAM.

Its becoming very frustrating. Any advice would be appreciated.

[attachment=16995:Picture_2.jpg]

Title: Capture One problem.
Post by: EricWHiss on October 06, 2009, 11:51:12 am

Quote from: Bonobo

Im using Capture One on my MBP and keeping on getting this problem. Im running 4.8.3 DB version (not Pro) on a 2.4ghz dual core with 2 gigs of RAM.

Its becoming very frustrating. Any advice would be appreciated.

[attachment=16995:Picture_2.jpg]

Title: Capture One problem.
Post by: EricWHiss on October 06, 2009, 11:53:02 am

I have the same issue on my MBP 2.9ghz dual core.

Quote from: Bonobo

Im using Capture One on my MBP and keeping on getting this problem. Im running 4.8.3 DB version (not Pro) on a 2.4ghz dual core with 2 gigs of RAM.

Its becoming very frustrating. Any advice would be appreciated.

[attachment=16995:Picture_2.jpg]

Title: Capture One problem.
Post by: nik on October 06, 2009, 02:11:45 pm

You may have better luck by posting in this thread;

http://luminous-landscape.com/forum/index.php?showforum=44 (http://luminous-landscape.com/forum/index.php?showforum=44)

or at PhaseOne's forum;

http://forum.phaseone.com/En/ (http://forum.phaseone.com/En/)

Have you dumped your phaseone prefs and emptied your batch history queue?

I'm running 4.8.3 Pro on the same hardware, never seen this.

-N

Quote from: Bonobo

Im using Capture One on my MBP and keeping on getting this problem. Im running 4.8.3 DB version (not Pro) on a 2.4ghz dual core with 2 gigs of RAM.

Its becoming very frustrating. Any advice would be appreciated.

[attachment=16995:Picture_2.jpg]

Title: Capture One problem.
Post by: mtomalty on October 06, 2009, 04:27:55 pm

Quote

You may have better luck by posting in this thread;

...or try mentioning Hasselblad in the thread title.

Then the Phase personalities will be all over it     :>))


Mark

www.marktomalty.com

Title: Capture One problem.
Post by: tho_mas on October 06, 2009, 04:35:45 pm

I've seen fancy artefacts in Capture One due to corrupt monitor profile (actually only the naming convention was a problem) and on Windows after the installation of AdobeCMM.
I've not seen artefacts like yours (but similar) but maybe you could check the monitor profile (just as a test set sRGB or AppleRGB as monitor profile and see if it works).
You can also try to set the destination profile as proof profile... just to check if there is something wrong with the CM.

Title: Capture One problem.
Post by: FlashDB on October 06, 2009, 04:41:22 pm

Quote from: Bonobo

Im using Capture One on my MBP and keeping on getting this problem. Im running 4.8.3 DB version (not Pro) on a 2.4ghz dual core with 2 gigs of RAM.

Its becoming very frustrating. Any advice would be appreciated.

[attachment=16995:Picture_2.jpg]

Hi

Could be a bug in Capture One or your graphics card. Go via their forum or support that is usually better than here.
I run 4.8.3 on my 2.4GHz Quad using 32 bit Windows Xp fairly stable, sometimes with some strange crashes though.
LightRoom and Phocus runs perfect.

Good luck!

/David

Title: Capture One problem.
Post by: Tgrain on October 06, 2009, 09:25:09 pm

[attachment=17011:Screen_s...26.06_PM.png]

The only thing I can think of is that you have multi-view selected instead for single view and somehow the program is glitching displaying only one image in multi-view.