Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: JoeKitchen on September 24, 2009, 02:19:00 pm
-
Does any one know of a company that makes gels which will not melt, crinkle, burn, evaporate, etc. in fresnel lights? I have tried out a few different brands, even one made for the lights, and have been unsuccessful in finding any. If you know of any, could you tell me the brand and where I could get them.
-
Roscoe.
Don't place the gel right on the face of the fresnel. Space it with the barn doors. Use clothes pins to secure the gel to the barn doors, or use gaf tape.
-
They use to sell a glass gels that can be used on hot lights, they where also fade resistant. If I remember they cost around $100
-
Roscoe.
Don't place the gel right on the face of the fresnel. Space it with the barn doors. Use clothes pins to secure the gel to the barn doors, or use gaf tape.
Ditto; I'm using wooden cloth pins, though, the bigger hotlights can heat up the barn doors as well.
There are some gels by Lee and Rosco that are more heat resistant, and glass filters available for some lights; you can also have simple glass filters custom made by some of the filter manufacturers, shouldn't be overly expensive.
-
roscoe sell a material called heat shield it is a very useful filter for protecting other filters I use it to protect polarisers it prolongs the life of pol filters by years. It is important to have a light air space between the heat shield and the other filter
-
Thanks, I will have to look into the roscoe gels and the heat shields.
-
Lee Filter makes a better grade of gel then Roscoe does - and they certainly don't crinkle like Roscoe does.
Here is Lee's High Temperature Filters:
[a href=\'index.php?showtopic=0\']http://www.leefiltersusa.com/lighting/products/finder/ref:C46544C3EE7295/[/a]
-
Okay, I now that it has rained for about three weeks on end; I know that I have lots of things to do as soon as the place dries out again, but I couldn't help thinking: in this thread, how different it would read if you were to substitue gals for gels.
As I said, it has rained a lot.
Rob C
-
roscoe sell a material called heat shield it is a very useful filter for protecting other filters I use it to protect polarisers it prolongs the life of pol filters by years. It is important to have a light air space between the heat shield and the other filter
Good point, actually everything between the light source and the gel will greatly reduce heat issues, clear glass, clear gels etc..
As you said, there always needs to be a gap between the layers for the trick to be effective .