Pages: [1]   Go Down

Author Topic: 4000+dbl sided printing+roller marks  (Read 3266 times)

norbertsf

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
    • http://
4000+dbl sided printing+roller marks
« on: January 28, 2006, 02:11:59 am »

Ok,

I have searched and searched and searched online and on forums to see if there is a solution to my problem. I am surprised I have not encountered mention of it. HOW does one prevent or eliminate the track marks from the rollers when doing dbl sided MATTE PAPER printing on an Epson 4000?!?!?

I am using Ultrachrome inks, + Epson Dbl Sided matte Paper. I have tried Red River Dbl also.
Things I have tried (but don't work):

1. Other paper
2. Letting first print side dry overnight before running second side.
3. Spraying 1st side with lumijet spray(drying for 2 hours), then running second side.
4. I was initialy tray feeding and thought it was the bending around of the paper through the printer path.
So...I tried front manual feed (straight paper path method)...Still marks!
5 Called Epson...no help.

The rollers are clean. What is left on the print is a light sheen/scuffing that matches the outgoing rollers.
Any solutions suggestions?

Thanks,
Norbert
Logged

Andrew Larkin

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
4000+dbl sided printing+roller marks
« Reply #1 on: February 01, 2006, 01:58:34 am »

What about using another piece of (thin) paper over the first image to protect it and feeding the two pieces through together?

Andrew
Logged

elaverty

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
4000+dbl sided printing+roller marks
« Reply #2 on: June 22, 2006, 01:06:54 pm »

Have you come across any solutions yet?

I have a 4800 and experience the same problem.  One suggestion was to remove the rollers but I do not know how this will effect performance.

It would be great to hear of your recent experiences.
Logged

Eric Myrvaagnes

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 22814
  • http://myrvaagnes.com
    • http://myrvaagnes.com
4000+dbl sided printing+roller marks
« Reply #3 on: June 22, 2006, 05:03:08 pm »

For the lowly 2200, MIS (www.inksupply.com) sells a set of little gizmos to insert into the printer that hold the pizza wheels up so they don't contact the paper surface. I installed them because I was always getting track marks on glossy paper, and the pizza wheels seem to be completely unnecessary.

I use Epson double-sided paper from time to time and have never noticed the track marks. So you might look to see if there is a way to wedge something against the shaft that the wheels ride on to hold them out of the way. I don't have either a 4000 or a 4800, so I don't know if the same trick will work on them.

Eric
Logged
-Eric Myrvaagnes (visit my website: http://myrvaagnes.com)
Pages: [1]   Go Up