I am interested in purchasing a digital back for Rz pro II (none D)
I read somewhere that phase one H mount can be adapted , I'd appreciate
If someone can tell me the plate number and where it can be Purchased
I am Also aware that 2 cables are needed one from lens to the back and one
From the back to the body what are the parts numbers?
The leaf backs or mamiya are a better choice for this system or all the same
As ease of usage and functionality?
There have been adapters for RZ that have a Hasselblad H interface available through Leaf that we have ordered over the years. I'm not sure if they are discontinued or not, but I'm pretty sure we can still get them. They come in a kit with a replacement ground glass that is etched for the image capture area of the digital back, along with a pc sync to digital back port (varies depending on the digital back), and a host cable (only necessary for triggering from the keyboard while connected to computer via Capture One).
Leaf or Mamiya - do you mean Mamiya ZD? Or if you mean Mamiya branded Leaf backs, that would have no bearing, either Leaf or Mamiya digital backs would be equivalent, except the ZD, which is somewhat different, but I'd prefer you stick to Leaf/Mamiya (non ZD).
Phase One digital backs also work in this configuration, except for an older P/P+, which only interfaces via a Phase One Hasselblad V, not H Adapter, unless you use a wake up cabling solution (clunky). *P40+/P65+ models don't require this. IQ/Credo are fine.
RZ Pro-II D is of course a different set of scenarios as well, but you did indicate Pro-II (non D).
Tayrik ....... it's a lot of somewhat un-clear information - above doesn't even cover every scenario. The above is in answer to your questions, but also for the benefit of the other viewers. You might want to give us a call ..... it will be easier for you.
Steve Hendrix
Capture Integration