Pages: [1]   Go Down

Author Topic: Settings needed for simply elegant matte canvas  (Read 624 times)

huguito

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
Settings needed for simply elegant matte canvas
« on: January 08, 2015, 11:52:00 pm »

I am going to profile a sample of simply elegant matte canvas on my 9600

What are your settings?
I can't find them in their website

Media type?   Looks like Ultrasmooth Fine Art could be OK but I am not sure
Platten Gap?

Hugo
Logged

bill t.

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 3011
    • http://www.unit16.net
Re: Settings needed for simply elegant matte canvas
« Reply #1 on: January 09, 2015, 12:22:52 am »

Gaps near max.  Fine Art Watercolor is the usual media for canvas in that category.

It's not a very sharp printing canvas, so it's probably better to err on the wide side for the gaps, there's no real penalty in reduced sharpness.

If you can find a profile and settings for Sunset Select Matte Canvas, use those.  BC "800M" canvas settings and profiles should also work.  Lyve would be OK too.

It's a nice canvas.  I ran 8300 profiles from coated targets and the gamut is as good as any matte canvas I've seen.
Logged

huguito

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
Re: Settings needed for simply elegant matte canvas
« Reply #2 on: January 09, 2015, 01:05:19 am »

Thanks Bill
That's exactly the info I was looking for
Logged

huguito

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
Re: Settings needed for simply elegant matte canvas
« Reply #3 on: January 09, 2015, 02:41:37 am »

In case this settings help someone else, after few tries find this are the ones working best with sharper results

Print as Watercolor Radiant White
Thickness 0.4 mm
Platten Gap  Standard
High Speed OFF
1440 dpi
Logged
Pages: [1]   Go Up