Pages: [1]   Go Down

Author Topic: Back to basics  (Read 4696 times)

Nill Toulme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 738
    • http://www.toulmephoto.com
Back to basics
« on: November 16, 2013, 01:49:53 pm »

Help please, for someone (me) who used to be reasonably tech-competent but, anymore, not so much.  It's been literally years since I set up color management on my old reliable XP system, and for years it's simply worked.  Still does, but I can't stand the lack of speed any longer.

So I finally broke down and bought a whole new system.  It's Win 7 64-bit.  It's pretty much up and running well although I haven't actually started any production on it.  I have a PA271W and NEC sensor on the way from B&H.  (I already own Spectraview II for my old reliable, but fading, 2090uxi, and I've downloaded the latest version.)

My core apps are C1 v7, Photoshop CS6, BreezeBrowser Pro and Qimage.  I print to an Epson 4800.

What I don't remember are all the steps for setting up color management in those apps.  I just vaguely recall that it seemed like there were a lot of them.  Where can I find a basically idiot-level, step-by-step cookbook for getting my color management set up properly?

Thanks.   
Logged

hugowolf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1001
Re: Back to basics
« Reply #1 on: November 16, 2013, 10:32:17 pm »

You shouldn't need to do anything. Install SpectraView II, run it, profile the montior, what else is to do?

Are you talking about color management for printers, projectors, scanners, cameras, as well as the monitor?

Brian A
« Last Edit: November 17, 2013, 01:37:46 pm by hugowolf »
Logged

D Fosse

  • Guest
Re: Back to basics
« Reply #2 on: November 17, 2013, 07:19:56 am »

I was about to say the same thing. Color management has this reputation for being "difficult", which is totally unfounded. If the application is color managed at all, it works right out of the box at default settings, and requires very little user intervention.

There are some details and policy decisions, like setting a white point for your monitor, but just start with the default settings. Don't change anything until you know why you would want to change it. For printing you need to pick a printer/paper/ink profile, otherwise the principle is the same: source/document profile > destination/device profile. That's color management summed up.

What makes color management difficult is applications without it, breaking the chain and causing inconsistencies.
« Last Edit: November 17, 2013, 07:52:05 am by D Fosse »
Logged

ksmyk

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
    • http://www.ksmyk.com
Logged

Nill Toulme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 738
    • http://www.toulmephoto.com
Re: Back to basics
« Reply #4 on: November 20, 2013, 08:22:31 pm »

Thanks all.  You've reminded me that I've forgotten even what I found easy and what relatively difficult.  Calibrating the monitor is a snap, I know.  It was setting up PS and Qimage to print using color management and particular paper profiles (which I have) that I recall as being somewhat step-heavy.
Logged

Shutterbug2006

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 94
Re: Back to basics
« Reply #5 on: November 21, 2013, 12:10:00 am »

What printer are you using?

Logged

Nill Toulme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 738
    • http://www.toulmephoto.com
Re: Back to basics
« Reply #6 on: November 21, 2013, 09:30:22 am »

Epson 4800
Logged

Jack Varney

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 413
    • http://
Re: Back to basics
« Reply #7 on: November 25, 2013, 10:05:58 pm »

Nill, check out Ian Lyons site, http://www.computer-darkroom.com/. I think you will find you will find what you need there.
Logged
Jack Varney

Nill Toulme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 738
    • http://www.toulmephoto.com
Re: Back to basics
« Reply #8 on: November 26, 2013, 10:04:58 am »

Thanks Jack.
Logged

Nill Toulme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 738
    • http://www.toulmephoto.com
Re: Back to basics
« Reply #9 on: November 26, 2013, 03:36:09 pm »

Nill, check out Ian Lyons site, http://www.computer-darkroom.com/. I think you will find you will find what you need there.
p.s.  Excellent, and exactly what I needed.  Thanks again!
Logged

Jack Varney

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 413
    • http://
Re: Back to basics
« Reply #10 on: November 26, 2013, 10:00:35 pm »

You are indeed welcome! I've relied on it for several Photoshop versions and am glad it worded for you.
Logged
Jack Varney

Nill Toulme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 738
    • http://www.toulmephoto.com
Re: Back to basics
« Reply #11 on: January 26, 2014, 06:51:30 pm »

One more dumb question, if I may ... should I calibrate (using Spectraview II) to Native Gamut (Full) or Adobe RGB (which is my usual working space)?
Logged

hugowolf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1001
Re: Back to basics
« Reply #12 on: January 26, 2014, 09:39:39 pm »

One more dumb question, if I may ... should I calibrate (using Spectraview II) to Native Gamut (Full) or Adobe RGB (which is my usual working space)?

Native, but you may recieve other opinions. Native will probably still not reach full AdobeRGB.

Brian A
Logged

Nill Toulme

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 738
    • http://www.toulmephoto.com
Re: Back to basics
« Reply #13 on: January 30, 2014, 04:34:59 pm »

Thanks.
Logged
Pages: [1]   Go Up