Pages: [1]   Go Down

Author Topic: LR UPRIGHT NOT WORKING  (Read 1868 times)

mdijb

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 467
    • mdiimaging.com
LR UPRIGHT NOT WORKING
« on: August 16, 2013, 04:06:27 PM »

Trying to use Upright on Files from the Sigma DP Merrils, which are now tiffs.  When clicking on the button in the upright panes--nothing happens--I tried all the buttons.

Profile correction is ON.  I even applied a profile for the other Sigma lenses that are supported-- Still nothing happens

ANY SUGGESTIONS??

MDIJB

Logged
mdiimaging.com

mdijb

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 467
    • mdiimaging.com
Re: LR UPRIGHT NOT WORKING
« Reply #1 on: August 16, 2013, 10:57:13 PM »

Now I am working on image from my NEX 7 and the same thing isoccurring--no changes at all when pusing each button in the panel--nothing.

MDIJB
Logged
mdiimaging.com

francois

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 8136
Re: LR UPRIGHT NOT WORKING
« Reply #2 on: August 18, 2013, 05:41:52 AM »

Hi,
FWIW, Upright works fine with TIFF images. I've tried to use it with a generic JPEG file (without profile) and upright works with mixed results.

When you say "nothing happens", does that mean that there's no visible change? Sometimes, when Upright doesn't find anything to correct, it just displays a message (see attached screenshot).
Logged
Francois

mdijb

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 467
    • mdiimaging.com
Re: LR UPRIGHT NOT WORKING
« Reply #3 on: August 18, 2013, 01:55:04 PM »

One of these images needed horizon leveling and Nothing happend.

I find it hard to believe that the images were perfect and pushing all the option resulted in no change.
Logged
mdiimaging.com

francois

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 8136
Re: LR UPRIGHT NOT WORKING
« Reply #4 on: August 19, 2013, 02:29:58 AM »

One of these images needed horizon leveling and Nothing happend.

I find it hard to believe that the images were perfect and pushing all the option resulted in no change.

You might want to contact Eric Chan (madmanchan) and send him your problematic images…
Logged
Francois
Pages: [1]   Go Up