Pages: [1]   Go Down

Author Topic: Settings for Epson 9600  (Read 1152 times)

huguito

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
Settings for Epson 9600
« on: June 14, 2013, 01:48:02 am »

Where do I find the settings for the platen gap in the print menu?
I am using this printer with a windows XP
Thanks

Hugo
Logged

darlingm

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 361
    • Westland Printworks
Re: Settings for Epson 9600
« Reply #1 on: June 14, 2013, 02:44:10 pm »

IF the driver has a similar layout to the 9900, on the Main tab, click Paper Config.  Near the bottom is Platen Gap.
Logged
Mike • Westland Printworks
Fine Art Printing • Amazing Artwork Reproduction • Photography
http://www.westlandprintworks.com • (734) 255-9761

huguito

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
Re: Settings for Epson 9600
« Reply #2 on: June 14, 2013, 04:37:49 pm »

Thanks
I will look again, I think that option is not there but is worth looking again
Logged

Jim Metzger

  • Full Member
  • ***
  • Offline Offline
  • Posts: 136
Re: Settings for Epson 9600
« Reply #3 on: June 17, 2013, 12:06:45 am »

The 9600 is the same feature set as the 7600 and the platen gap is set on the printer itself. Very easy to do. Page 2-19 in the manual, available online.

Press "select type" so PRINTER SETUP appears.
press the > key twice to get to platen gap.
use ^ and V arrow keys to set platen width.
Press ENTER
Press Pause to hold the setting. Don't forget to switch back to STANDARD when done.
Logged

huguito

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
Re: Settings for Epson 9600
« Reply #4 on: June 18, 2013, 02:23:35 am »

Thanks very much
Logged
Pages: [1]   Go Up