Pages: [1]   Go Down

Author Topic: capture pilot and hasselblad 503cw/winder/iq160  (Read 1153 times)

geesbert

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 638
    • http://www.randlkofer.com
capture pilot and hasselblad 503cw/winder/iq160
« on: June 09, 2013, 04:19:06 AM »

is there a way to trigger the hasselblad with winder by capture pilot?

i've seen there is a motor cable available for the 503, would this work?

currently I am using the hasselblad ir remote, but it's always nice to reduce gadgets....
Logged
-------------------------
WWW.RANDLKOFER.COM

Steve Hendrix

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1381
    • http://www.captureintegration.com/
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #1 on: June 09, 2013, 07:43:08 PM »

is there a way to trigger the hasselblad with winder by capture pilot?

i've seen there is a motor cable available for the 503, would this work?

currently I am using the hasselblad ir remote, but it's always nice to reduce gadgets....



It certainly works with Capture One, and while I haven't tried it with Capture Pilot, generally any camera that you can release from Capture One should be releasable from Capture Pilot.


Steve Hendrix
Capture Integration
Logged
Steve Hendrix 404-543-8475 www.captureintegration.com (e-mail Me)
Phase One | Leaf | Leica | Alpa | Cambo | Sinar | Arca Swiss

geesbert

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 638
    • http://www.randlkofer.com
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #2 on: June 10, 2013, 10:55:19 AM »

Grest, thanks. I'll give it a try and report back...
Logged
-------------------------
WWW.RANDLKOFER.COM

LukeB

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #3 on: June 11, 2013, 09:32:23 AM »


It certainly works with Capture One, and while I haven't tried it with Capture Pilot, generally any camera that you can release from Capture One should be releasable from Capture Pilot.


Steve Hendrix
Capture Integration

You will need a trigger cable, it goes from the back to the 503s winder.
Logged

Steve Hendrix

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1381
    • http://www.captureintegration.com/
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #4 on: June 11, 2013, 09:12:12 PM »

You will need a trigger cable, it goes from the back to the 503s winder.

Indeed - I assumed that is what Stefan was referring to in the initial post. For absolute clarity, part # 50300146, cost is $98.

https://captureintegration.com/product/motor-cable-for-p-and-iq-backs/


Steve Hendrix
Capture Integration
Logged
Steve Hendrix 404-543-8475 www.captureintegration.com (e-mail Me)
Phase One | Leaf | Leica | Alpa | Cambo | Sinar | Arca Swiss
Pages: [1]   Go Up