Pages: [1]   Go Down

Author Topic: capture pilot and hasselblad 503cw/winder/iq160  (Read 988 times)

geesbert

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 616
    • http://www.randlkofer.com
capture pilot and hasselblad 503cw/winder/iq160
« on: June 09, 2013, 04:19:06 AM »

is there a way to trigger the hasselblad with winder by capture pilot?

i've seen there is a motor cable available for the 503, would this work?

currently I am using the hasselblad ir remote, but it's always nice to reduce gadgets....
Logged
-------------------------
WWW.RANDLKOFER.COM

Steve Hendrix

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1293
    • http://www.captureintegration.com/
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #1 on: June 09, 2013, 07:43:08 PM »

is there a way to trigger the hasselblad with winder by capture pilot?

i've seen there is a motor cable available for the 503, would this work?

currently I am using the hasselblad ir remote, but it's always nice to reduce gadgets....



It certainly works with Capture One, and while I haven't tried it with Capture Pilot, generally any camera that you can release from Capture One should be releasable from Capture Pilot.


Steve Hendrix
Capture Integration
Logged
Steve Hendrix
Sales Manager, www.captureintegration.com (e-mail Me)
MFDB: Phase One/Leaf-Mamiya/Hasselblad/Leica/Sinar
TechCam: Alpa/Cambo/Arca Swiss/Sinar
Direct: 404.543.8475

geesbert

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 616
    • http://www.randlkofer.com
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #2 on: June 10, 2013, 10:55:19 AM »

Grest, thanks. I'll give it a try and report back...
Logged
-------------------------
WWW.RANDLKOFER.COM

LukeB

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #3 on: June 11, 2013, 09:32:23 AM »


It certainly works with Capture One, and while I haven't tried it with Capture Pilot, generally any camera that you can release from Capture One should be releasable from Capture Pilot.


Steve Hendrix
Capture Integration

You will need a trigger cable, it goes from the back to the 503s winder.
Logged

Steve Hendrix

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1293
    • http://www.captureintegration.com/
Re: capture pilot and hasselblad 503cw/winder/iq160
« Reply #4 on: June 11, 2013, 09:12:12 PM »

You will need a trigger cable, it goes from the back to the 503s winder.

Indeed - I assumed that is what Stefan was referring to in the initial post. For absolute clarity, part # 50300146, cost is $98.

https://captureintegration.com/product/motor-cable-for-p-and-iq-backs/


Steve Hendrix
Capture Integration
Logged
Steve Hendrix
Sales Manager, www.captureintegration.com (e-mail Me)
MFDB: Phase One/Leaf-Mamiya/Hasselblad/Leica/Sinar
TechCam: Alpa/Cambo/Arca Swiss/Sinar
Direct: 404.543.8475
Pages: [1]   Go Up