Pages: [1]   Go Down

Author Topic: CS-5 the Z3100 and Selecting "Application Managed Colors"  (Read 671 times)

Jim Cole

  • Sr. Member
  • ****
  • Online Online
  • Posts: 376
    • Jim Cole Photography
CS-5 the Z3100 and Selecting "Application Managed Colors"
« on: February 01, 2013, 04:37:19 PM »

Back when I used CS-3, I swear that when I checked "Application Managed Colors" in the Z3100 Color Tab of the print driver, that the setting was sticky.

In other words, every time I went to print, it was already set correctly.

Now in CS-5 I have to remember to set it every time I print.

I thought I remember being able to use the Z3100 Printer Utility to set this permanently, but I don't see it.

Can anyone tell me how to make this setting stick? Maybe I can't and I'm just getting old and forgetful!

Thanks,
Jim
Logged
Jim Cole
Flagstaff, AZ
www.jimcolephoto.com

Damir

  • Full Member
  • ***
  • Offline Offline
  • Posts: 190
Re: CS-5 the Z3100 and Selecting "Application Managed Colors"
« Reply #1 on: February 01, 2013, 05:24:56 PM »

Can't give you instruction, but can confirm that it is sticky, since I still use CS3, therefore you are not old and forgetful. OK maybe you are old, I can't tell for sure but not forgetful  ;)
Logged

Jim Cole

  • Sr. Member
  • ****
  • Online Online
  • Posts: 376
    • Jim Cole Photography
Re: CS-5 the Z3100 and Selecting "Application Managed Colors"
« Reply #2 on: February 01, 2013, 05:29:24 PM »

Thanks, Damir. It's nice to know that I'm just old :D

Anyone know if it's possible to make this setting sticky in CS-5?
Logged
Jim Cole
Flagstaff, AZ
www.jimcolephoto.com

Rocco Penny

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 483
Re: CS-5 the Z3100 and Selecting "Application Managed Colors"
« Reply #3 on: February 02, 2013, 11:35:54 AM »

lotsa variables
drivers all have to match
so in start menu, then devices go to z3100, printer properties, advanced tab, printer defaults then select your settings
then in printer properties, general tab, preferences, select your settings,
then in whichever application you're using choose the settings as you would.
If it doesn't stick then, you have just experienced a moment of "what the heckin hey with this quirky software????
I check every time I print...
if you don't you risk... well you know, you're the one asking...
Logged

Jim Cole

  • Sr. Member
  • ****
  • Online Online
  • Posts: 376
    • Jim Cole Photography
Re: CS-5 the Z3100 and Selecting "Application Managed Colors"
« Reply #4 on: February 02, 2013, 03:07:28 PM »

Thanks, Rocco, that's what I needed. I couldn't remember where I had set that stuff before.

Chao!
Logged
Jim Cole
Flagstaff, AZ
www.jimcolephoto.com
Pages: [1]   Go Up