Pages: [1]   Go Down

Author Topic: Epson 3880 Borderless Prints and Custom Sizes  (Read 2407 times)

zaptrax

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Epson 3880 Borderless Prints and Custom Sizes
« on: January 29, 2013, 06:57:22 pm »

I have an Epson 3880 and have a printing question about custom sizes and borderless printing. The printer is capable of printing a borderless 17" x 22" print. Clearly the printer can print the full 17" width. I want to make a print that is 17" x 23" with no border. I was thinking of cutting a sheet 17" x 25" from a roll and trimming it to 23" after printing. Is it possible to get the Epson 3880 to print all the way to the edge of the 17" sheet at any other length other than 22"? If so, how do I set this up?

Thanks
Logged

redriverpaper

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
Re: Epson 3880 Borderless Prints and Custom Sizes
« Reply #1 on: January 30, 2013, 05:28:56 pm »

As a rule, custom borderless sizes are not possible.  Epson sets the borderless options at the factory.  While you can create a user defined paper size, there is no way to direct the printer to make them borderless as well.
Logged

zaptrax

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: Epson 3880 Borderless Prints and Custom Sizes
« Reply #2 on: January 30, 2013, 05:41:40 pm »

Does that mean that even if you use a RIP you cannot create a custom borderless size?
Logged

redriverpaper

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
Re: Epson 3880 Borderless Prints and Custom Sizes
« Reply #3 on: January 30, 2013, 06:08:53 pm »

The borderless length should be adjustable by a RIP.  It's the width component that usually cannot be "hacked" because of the placement of the over-spray pads on the platen.  You'd want to check with your RIP maker.
Logged

hugowolf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1001
Re: Epson 3880 Borderless Prints and Custom Sizes
« Reply #4 on: January 30, 2013, 07:45:17 pm »

Does that mean that even if you use a RIP you cannot create a custom borderless size?
From the Epson Europe site for the 3880 with Mirage RIP: "Produce borderless photos from 4" up to 17" wide and any length you define, up to 37.4"."

Brian A
Logged

zaptrax

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: Epson 3880 Borderless Prints and Custom Sizes
« Reply #5 on: January 31, 2013, 05:51:40 am »

Thanks for the help.
Logged
Pages: [1]   Go Up