Pages: [1]   Go Down

Author Topic: Soft proofing in LR4  (Read 1680 times)

douvidl

  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
Soft proofing in LR4
« on: June 28, 2012, 10:18:46 am »

I've just finished the adobe tv show on Soft Proofing .  Very comprehensive and useful.  However I am left with a question.  At the beginning of the process you are asked to select the color space/profile of the final "output device".  Does that refer to the color space of the printer or the profile of the paper.  At the end of the process in the print section under color management you are asked to identify the profile of the paper. So my question is what is the final "output" device.
Seems redundant.
Thanks in advance for your efforts.
David
Logged

Geraldo Garcia

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 470
    • Personal blog
Re: Soft proofing in LR4
« Reply #1 on: June 28, 2012, 11:07:05 am »

A colour space (sRGB, Adobe RGB and so on...) is selected if you are softproofing for a digital output under that space. For printing you should select the profile for the printer/paper combination that will be used, the same you will select when printing.

Best regards.
Logged

douvidl

  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
Re: Soft proofing in LR4
« Reply #2 on: June 28, 2012, 12:01:28 pm »

Many thanks
David
Logged

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 20630
  • Andrew Rodney
    • http://www.digitaldog.net/
Re: Soft proofing in LR4
« Reply #3 on: June 28, 2012, 03:52:57 pm »

Logged
http://www.digitaldog.net/
Author "Color Management for Photographers".

douvidl

  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
Re: Soft proofing in LR4
« Reply #4 on: June 28, 2012, 04:18:07 pm »

Again, many thanks for helping. All very worthwhile
David
Logged
Pages: [1]   Go Up