Pages: [1]   Go Down

Author Topic: PA271W, Macbook Pro (mid 2010 15" i5), Display Port, 2560x1440?  (Read 4430 times)

JPenn

  • Newbie
  • *
  • Offline Offline
  • Posts: 3

Hi,

Own a Macbook Pro (mid 2010, 15", 2.4 GHz i5 running 10.6.8) and just bought an NEC PA271W display. I have it connected with a Startech mini Displayport to Displayport cord. At 1920x1080, 60hz, everything displays fine on the PA271W. If I change the display on the PA271W to 2048x1152, 60hz or 2560x1440, 60 hz the screen starts flashing horizontal bars of noise all over the display. I don't know much about these things but it seems like a refresh rate problem.

Should it be possible to make full use of the high resolution capability of this display using my laptop and the displayport cord?

Thanks for any assistance you might be able to provide.
Logged

figure1a

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 58
Re: PA271W, Macbook Pro (mid 2010 15" i5), Display Port, 2560x1440?
« Reply #1 on: May 15, 2012, 08:09:22 pm »

Cable may be the problem. Search Digilloyd's site http://www.digilloyd.com/  He loves this monitor and has found the same issues as you. He also has a fix. I only use the NEC display port cable per his recommendation and have no problems with the exact setup as you.
Logged

JPenn

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: PA271W, Macbook Pro (mid 2010 15" i5), Display Port, 2560x1440?
« Reply #2 on: May 16, 2012, 11:58:58 am »

I only found a reference to a sleep issue. I'll try buying the NEC brand cable though, and hopefully that will be the fix.

Thanks.
Logged

JonRoemer

  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
    • http://www.jonroemer.com/
Re: PA271W, Macbook Pro (mid 2010 15" i5), Display Port, 2560x1440?
« Reply #3 on: May 20, 2012, 11:08:40 am »

I have two of the NEC PA271W's - the NEC cable is the answer for Mac Pro, Macbook Pro, etc.

This is NEC's notice on the issue.  You can get a cable direct from NEC.
Logged
Website:

JPenn

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: PA271W, Macbook Pro (mid 2010 15" i5), Display Port, 2560x1440?
« Reply #4 on: May 22, 2012, 04:09:21 pm »

You were right. Just picked up the NEC cable and it worked like a charm. Awesome! Thanks so much.
Logged

lfeagan

  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
Re: PA271W, Macbook Pro (mid 2010 15" i5), Display Port, 2560x1440?
« Reply #5 on: May 23, 2012, 10:00:48 pm »

Glad to hear it resolved the problem. It sure stinks that third party manufacturers can't manage to get the pins correct on a such an easy and inexpensive standard to implement (it is royalty free and is not nearly as problematic as HDMI in terms of SNR). In addition to NEC's cable, which I have and use daily, I have also used dongles, such as this one http://www.hightech.com.hk/us/product2-667.shtml along with a DisplayPort cable successfully.
Logged
Lance

Nikon: D700, D800E, PC-E 24mm f/3.5D ED, PC-E 45mm f/2.8D ED, PC-E 85mm f/2.8D, 50mm f/1.4G, 14-24 f/2.8G ED, 24-70 f/2.8G ED, 70-200 f/2.8G ED VR II, 400mm f/2.8G ED VR
Fuji: X-Pro 1, 14mm f/2.8, 18mm f/2.0, 35mm f/1.4
Pages: [1]   Go Up