Pages: [1]   Go Down

Author Topic: Nec SpectraSensor Pro (MDSVSENSOR3)  (Read 1911 times)

ThDo

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Nec SpectraSensor Pro (MDSVSENSOR3)
« on: March 09, 2012, 02:44:14 AM »

Has anybody the Nec sensor?

I would like to know if it is locked and can only be used with the Spectraview software or if it is a "normal" OEM EODIS3 which can also be used with other software.



Logged

Ernst Dinkla

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 3227
Re: Nec SpectraSensor Pro (MDSVSENSOR3)
« Reply #1 on: March 09, 2012, 03:19:25 AM »

Try ArgyllCMS - DispcalGui, usually the most compatible with rebranded meters.


met vriendelijke groeten, Ernst
Shareware too:
330+ paper white spectral plots:
http://www.pigment-print.com/spectralplots/spectrumviz_1.htm
Logged

ThDo

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Re: Nec SpectraSensor Pro (MDSVSENSOR3)
« Reply #2 on: March 09, 2012, 04:30:26 AM »

I do not have the sensor - so I want to know if it is possible or not.

(so I can decide what to buy - the Nec or the retail version)




Logged

Alan Goldhammer

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1926
    • A Goldhammer Photography
Re: Nec SpectraSensor Pro (MDSVSENSOR3)
« Reply #3 on: March 09, 2012, 08:44:32 AM »

I do not have the sensor - so I want to know if it is possible or not.

(so I can decide what to buy - the Nec or the retail version)
I have a NEC branded sensor with Spectraview and it works fine with ArgyllCMS.  You only have to load the ArgyllCMS driver to make it operational.
Logged

ThDo

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Re: Nec SpectraSensor Pro (MDSVSENSOR3)
« Reply #4 on: March 10, 2012, 07:07:59 AM »

You really got the MDSVSENSOR3 working with the current version of argyllcms?!

That's interesting than Graeme Gill wrote me this: "The current version supports only the retail and calman OEM version, but the next release will also work with the NEC meter"


Logged

Ethan_Hansen

  • Full Member
  • ***
  • Offline Offline
  • Posts: 114
    • Dry Creek Photo
Re: Nec SpectraSensor Pro (MDSVSENSOR3)
« Reply #5 on: March 10, 2012, 01:05:50 PM »

I tried Argyllcms 1.35 (latest release version) with the NEC sensor. It fails after a call to libusb_get_config_descriptor(). Looks like cannot talk to the NEC sensor without the appropriate unlock code. There may be a newer dev snapshot of Argyll that works with the NEC i1D3 puck, but I couldn't replicate Alan's success with the release version.

Alan Goldhammer

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1926
    • A Goldhammer Photography
Re: Nec SpectraSensor Pro (MDSVSENSOR3)
« Reply #6 on: March 10, 2012, 02:43:07 PM »

I tried Argyllcms 1.35 (latest release version) with the NEC sensor. It fails after a call to libusb_get_config_descriptor(). Looks like cannot talk to the NEC sensor without the appropriate unlock code. There may be a newer dev snapshot of Argyll that works with the NEC i1D3 puck, but I couldn't replicate Alan's success with the release version.
My bad!  I misread the thread; I have the earlier NEC sensor not the one under question.
Logged
Pages: [1]   Go Up