Pages: [1]   Go Down

Author Topic: baby graflok digital adaptor plates?  (Read 3102 times)

torger

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 3267
baby graflok digital adaptor plates?
« on: March 01, 2012, 04:42:17 am »

Okay, this is the "I have a friend that wonders" type of question :). I'm not planning to make a high end digital system out of a Horseman VH.

Still, this is the question - Horseman VH has graflok 6x9 international standard interface, also called "baby graflok", where you put in the rollfilm backs - is there any digital back adapters for this format? It is easy to find for 4x5" graflok, but not the smaller it seems.

Maybe Arca-Swiss 6x9 adapter plates for the F-line cameras will fit on the horseman baby graflok?
Logged

torger

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 3267
Re: baby graflok digital adaptor plates?
« Reply #1 on: March 01, 2012, 03:25:28 pm »

is there any digital back adapters for this format?

ok, let's assume no :)
Logged

yaya

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1254
    • http://yayapro.com
Re: baby graflok digital adaptor plates?
« Reply #2 on: March 01, 2012, 03:39:36 pm »

Check with Nexor in CHina, I believe that the Mergin-X sliding back can be fitted with a 6x9 Graflok plate
Logged
Yair Shahar | Product Manager | Phase One - Cultural Heritage
e: ysh@phaseone.com |

Brian Hirschfeld

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 847
    • Brian Hirschfeld Photography
Re: baby graflok digital adaptor plates?
« Reply #3 on: March 01, 2012, 07:07:44 pm »

I know nothing about this, but I would also say to check with Kapture Group http://www.kapturegroup.com/ if they don't have what your looking for, they might be able to fabricate someone for your "friend" ;)

Just from a quick look they make a sliding back that they call a "compact" sliding back "exclusively" for the Arca RM3D which is a 6x9 format camera...
Logged
www.brianhirschfeldphotography.com / www.flickr.com/brianhirschfeldphotography
---------------------------------------------------------------
Leica / Nikon / Hasselblad / Mamiya ~ Proud IQ180 owner

EricWHiss

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2639
    • Rolleiflex USA
Re: baby graflok digital adaptor plates?
« Reply #4 on: March 01, 2012, 07:19:49 pm »

they might be able to fabricate someone for your "friend" ;)

Could they fabricate someone for me too?  ;D
Logged
Rolleiflex USA

Brian Hirschfeld

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 847
    • Brian Hirschfeld Photography
Re: baby graflok digital adaptor plates?
« Reply #5 on: March 01, 2012, 07:21:45 pm »

Everything is possible if you have a large enough wallet lol
Logged
www.brianhirschfeldphotography.com / www.flickr.com/brianhirschfeldphotography
---------------------------------------------------------------
Leica / Nikon / Hasselblad / Mamiya ~ Proud IQ180 owner

ondebanks

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 858
Re: baby graflok digital adaptor plates?
« Reply #6 on: March 02, 2012, 07:56:50 am »

The Mamiya RB67 (and some Mamiya Press) film backs are also "baby graflok", but before you get all excited thinking "I've seen digital backs on an RB67!", the "G adapter" (G for Graflok) has to come off before the digital back adapter (e.g. Mamiya HX702) goes on. So, since the most commonly used "baby graflok" camera doesn't actually use its graflok fitting for mounting digital backs, I would not be very hopeful that you'll find something off-the-shelf.

Ray
Logged
Pages: [1]   Go Up