Pages: [1]   Go Down

Author Topic: Cokin X-Pro Series filter holders, case, 77mm adapter ring, Nik 14-24 univ ring  (Read 2511 times)

EverPhoto

  • Newbie
  • *
  • Offline Offline
  • Posts: 12

Cokin X-Pro Series filter holders and filters.

Includes:

77mm adapter ring. $61.99 new – will sell alone for $40.
http://www.bhphotovideo.com/c/product/168524-REG/Cokin_CX477_X_Pro_77mm_Adapter_Ring.html

Universal adapter ring. $149.95 new – will sell alone for $95.
I had been using this on a Nikon 14-24mm F/2.8, which does not have a front filter thread. This will work on any lens that has a front barrel diameter up to 118mm.
http://www.bhphotovideo.com/c/product/168533-REG/Cokin_CX499_X_Pro_Universal_Adapter_Ring.html

Two X-Pro filter holders. $60.49 new – will sell each for $40 (tell me which of the two you want since one is single track and the other is triple track – read notes below)
http://www.bhphotovideo.com/c/product/169219-REG/Cokin_CBX100_X_Pro_Filter_Holder_Requires.html

X306 X-Pro filter wallet – with seven pockets. $34.65 new – will sell for $22.
http://www.bhphotovideo.com/c/product/250081-REG/Cokin_CX306_X306_X_Pro_Filter_Wallet.html


OK – now that I have listed everything there are some VERY IMPORTANT notes I need to make. I have modified one of the filter holders to work with a full frame Nikon camera using the ultra-wide Nikon 14-24mm F/2.8 lens. To be able to orient the filter on a diagonal, I had to get rid of the second track and then sand down the center portion of the remaining track. I modified the second filter holder with two tracks to work with a full frame Nikon camera using the ultra-wide Nikon 16-25mm F/4 lens. Again, to be able to orient the filter on a diagonal, while using the second track, I had to sand down the center portion of the track. This DOES NOT affect the use of the holders for other lenses. It’s just when you get so wide on full frame the holder starts to become visible in the corners so you have to do what you have to do. I included close-up photos of the modifications I made. You cannot make the single track a double track again as it’s a single molded piece.

OK – that’s it. Attached below are all the photos.

I can generally meet in person in northeast Ohio for hand delivery.

Prices above include shipping ( USPS, UPS, or FedEx - whatever I find is my cheapest route ) and PayPal fees.
If you want to negotiate down I will not cover shipping or PayPal so keep that in mind please.

NOTE:  The three filters in the photo have all been sold.
« Last Edit: February 16, 2012, 07:25:01 pm by EverPhoto »
Logged

EverPhoto

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: Cokin X-Pro Series filter holders and filters.
« Reply #1 on: February 16, 2012, 07:24:20 pm »

bump
Logged

clintonwake

  • Newbie
  • *
  • Offline Offline
  • Posts: 1

Hi

Are these sold. I have a Canon 17mmTSE. Will this holder and adapter work n fit n will there be issues with vignetting. I have a Full Frame camera.
my email is denis@liquidgecko.com
Logged
Pages: [1]   Go Up