Poll

LR or...?

LR
- 23 (65.7%)
other software
- 12 (34.3%)

Total Members Voted: 35


Pages: 1 [2]   Go Down

Author Topic: Black & White  (Read 10485 times)

aduke

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 446
Re: Black & White
« Reply #20 on: June 24, 2011, 12:26:46 am »

Go to George Jardine’s blog and watch this video tutorial, its outstanding!

http://mulita.com/blog/?p=1244

A big +1.

I watched it yesterday, found it incredibly useful.

Alan

Logged

schrodingerscat

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 374
Re: Black & White
« Reply #21 on: July 26, 2011, 12:58:51 pm »

If I remember correctly, the image as captured by the sensor and saved as RAW is actually B&W, with software converting it to color. Probably too simplistic, but I think that's the general  idea. Not sure how much bearing that has on results. The cameras I've used in B&W mode have all saved the files as jpegs.

It seems that as far as B&W printing is concerned, the printer is the crux of the biscuit. While a regular inkjet can produce fairly decent results, a dedicated carbon black setup is more preferred. I've been fooling around with an R1900 with a CIS system using MS blacks, and while B&Ws are OK, they are just that, OK. If I had the room, I'd pick up a new printer for regular use and convert the 1900 to just B&W.
Logged

Schewe

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 6229
    • http:www.schewephoto.com
Re: Black & White
« Reply #22 on: July 26, 2011, 03:01:13 pm »

If I remember correctly, the image as captured by the sensor and saved as RAW is actually B&W, with software converting it to color. Probably too simplistic, but I think that's the general  idea.

The raw file contains monochromatic photosite data based on the spectral properties of the color filters that is then converted into RGB upon demosiacing. Not really correct to call it "B&W".
Logged

John MacLean

  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
    • John MacLean Photography
Re: Black & White - printing
« Reply #23 on: August 21, 2011, 09:44:03 am »

I'm going to give a plug to a friend of mine who has a lab in Los Angeles that does real Ilford fiber base prints directly from digital files via his Lightjet imager. These prints are beautiful and he can go up to 48x120"!

Check it here: http://www.weldoncolorlab.com/fiberblackwhite.php

neile

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1093
    • http://www.danecreekfolios.com
Re: Black & White
« Reply #24 on: August 23, 2011, 11:05:01 am »

I use and highly recommend Nik Silver Efex Pro 2.0. I used to use Lightroom's built-in B&W tools, but SEP's controls are just so intuitive and easy to use. I commented a bit about it over on Brooks Jensen's blog when someone there asked him about SEP vs. Lightroom: http://askbrooks.lenswork.com/2011/05/bw-conversions-using-lightroom-or-nik-silver-efex-2.html.

Don't fall into the trap of thinking that SEP is just a bunch of fancy presets. That'd be like saying Lightroom's develop module is just a bunch of presets in the left pane!

Neil
Logged
Neil Enns
Dane Creek Folio Covers. Limited edition Tuscan Sun and Citron covers are now in stock!

JohnBrew

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 868
    • http://www.johnbrewton.zenfolio.com
Re: Black & White
« Reply #25 on: August 23, 2011, 12:59:54 pm »

I tried SilverEfex (twice!) but found there wasn't anything I couldn't replicate with Adobe products. Everyone's approach can be different because many of us are pleasing ourselves (umm, that sounds like photo masterbation!) or what we perceive to be. I would recommend Advanced Digital Black & White Photography by John Beardsworth. Many approaches - many different tastes. Good luck.
Pages: 1 [2]   Go Up