Pages: [1]   Go Down

Author Topic: Vertical Banding on Z6100  (Read 731 times)


  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 433
Vertical Banding on Z6100
« on: November 17, 2010, 11:54:33 PM »

I'm printing a 1.5m x 1.2m image and I realized there are vertical banding under Windows 7 + PS CS5. Now I'm printing the image by submitting the image directly to HP Color Utility Center, and the vertical banding is gone. I believe this is costed by the printer driver since I am bypassing their driver to print. Does anyone have any exp. on this problem before?


Ernst Dinkla

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 3174
Re: Vertical Banding on Z6100
« Reply #1 on: November 19, 2010, 03:01:26 AM »

No experience with the Z6100 but if it is that critical it could well be a slight misalignment of the heads. Do a heads realignment but first clean the rod the head carriage runs on and oil it with the prescribed oil.  That head has to run fast. I have done the same on a Z3100 and Z3200 when I noticed a small vertical misalignment.

met vriendelijke groeten, Ernst Dinkla


Pages: [1]   Go Up