Pages: [1]   Go Down

Author Topic: new Sinar eShutter  (Read 2974 times)

edwinb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 147
    • http://www.image2output.com
new Sinar eShutter
« on: September 09, 2010, 05:06:15 pm »

Sinar have released advance information from  Photokina (in Hall 4.2 / Booth C-028) on their new electronic shutter (Sinar eShutter Press release)
The images show it mounted in 100 format and unmounted to fit copal 0.

Edwin
Logged
Edwin Blenkinsopp
Technical Manager
image2output
m:  +44 (0) 7836 674749
e: edwin@image2output.com
w: Sinar |  Foba |Inkjet

Dick Roadnight

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1730
Re: new Sinar eShutter
« Reply #1 on: September 09, 2010, 06:20:15 pm »

Sinar have released advance information from  Photokina (in Hall 4.2 / Booth C-028) on their new electronic shutter
The images show it mounted in 100 format and unmounted to fit copal 0.
Edwin
Yes, Edwin, I am interested...

I was going to order a set of Schneider Electronic Shuttered Apo-Digitars...

Will they work with...

Hasselblad H4D
Hasselblad CF39
Sinar F3
RMS screw macro-lenses
Recessed lensboards for what focal length?

Does it enable remote setting of the aperture of apo-digitars?

Will the new Sinar Hasselblad V board work on the Sinar F3, or can you buy an F3 with it?
« Last Edit: September 09, 2010, 06:22:54 pm by Dick Roadnight »
Logged
Hasselblad H4, Sinar P3 monorail view camera, Schneider Apo-digitar lenses

edwinb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 147
    • http://www.image2output.com
Re: new Sinar eShutter
« Reply #2 on: September 09, 2010, 06:51:03 pm »

I can try........
the sinar F3 will work the same as the P3,
the shutter will fit any copal zero fitting
I am not sure what you mean  "new Sinar Hasselblad V board"  however the sinarback 86h uses the current hasselblad v adaptor to fit to hasselblad  or a P3 sliding adaptor with a hasselblad v mount option (which takes any cameraback with a v mounting)
I hope that helps, I haven't seen one of these shutters yet but looking at the images would expect to see the whole cmv / cpl / cab range of lens accommodated

Edwin

Logged
Edwin Blenkinsopp
Technical Manager
image2output
m:  +44 (0) 7836 674749
e: edwin@image2output.com
w: Sinar |  Foba |Inkjet

Dick Roadnight

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1730
Re: new Sinar eShutter
« Reply #3 on: September 10, 2010, 05:53:59 am »

I can try........
the sinar F3 will work the same as the P3,
the shutter will fit any copal zero fitting
I am not sure what you mean  "new Sinar Hasselblad V board"  however the sinarback 86h uses the current hasselblad v adaptor to fit to hasselblad  or a P3 sliding adaptor with a hasselblad v mount option (which takes any cameraback with a v mounting)
I hope that helps, I haven't seen one of these shutters yet but looking at the images would expect to see the whole cmv / cpl / cab range of lens accommodated

Edwin
Do you need a USB back to the computer, or do you fire the Hasselblad back from the computer, and the shutter from the back? ...or does the shutter fire the back?
Logged
Hasselblad H4, Sinar P3 monorail view camera, Schneider Apo-digitar lenses

edwinb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 147
    • http://www.image2output.com
Re: new Sinar eShutter
« Reply #4 on: September 10, 2010, 05:23:20 pm »

I don't have any info on the trigger but similar items used a flash sync output
edwin
Logged
Edwin Blenkinsopp
Technical Manager
image2output
m:  +44 (0) 7836 674749
e: edwin@image2output.com
w: Sinar |  Foba |Inkjet

Dick Roadnight

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1730
Re: new Sinar eShutter
« Reply #5 on: September 11, 2010, 05:13:28 am »

I don't have any info on the trigger but similar items used a flash sync output
edwin
The Schneider Electronic Shutter can be controlled directly from Phocus.
Logged
Hasselblad H4, Sinar P3 monorail view camera, Schneider Apo-digitar lenses

edwinb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 147
    • http://www.image2output.com
Re: new Sinar eShutter
« Reply #6 on: September 13, 2010, 05:56:25 pm »

(public answer to private messaged question)
the eShutter uses the same battery as the Hy6/Emotion
Edwin
Logged
Edwin Blenkinsopp
Technical Manager
image2output
m:  +44 (0) 7836 674749
e: edwin@image2output.com
w: Sinar |  Foba |Inkjet

Dick Roadnight

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1730
Re: new Sinar eShutter
« Reply #7 on: September 14, 2010, 07:24:27 am »

(public answer to private messaged question)
the eShutter uses the same battery as the Hy6/Emotion
Edwin

Thanks.... can you mount a Schneider Apo-Digitar 47XL in an eShutter to give infinity focus on a P3 with a Kapture group sliding back?

If the eShutter is not "expensive", and will do everything I want it to, I will have six.
Logged
Hasselblad H4, Sinar P3 monorail view camera, Schneider Apo-digitar lenses
Pages: [1]   Go Up