Topic: Aperture 3 keeps crashing on startup (Read 8329 times)

Frank Doorhof · « **on:** March 02, 2010, 03:08:27 pm »

Tomorrow I will start my sixth installation cycle.

When doing a app zap of all Aperture files and installing 3 fresh it will work fine for maybe 2-3 starts and after that it will just crash when opening, it never opens, the icon jumps one time and that's it.
I have disabled faces already, my database is on a fast drive and I've tried rebuilding it many times.

Working within Aperture 3 under Snow Leopard 64 bits is reasonable stable, although sometimes I wonder what's going on and than it works again.

It's frustating as can be because I use Aperture a lot and now it's custom to just install it every other day to be able to work with it.

Anyone an idea ?

there are NO filters installed.

KirbyKrieger · « **Reply #1 on:** March 02, 2010, 03:44:05 pm »

Just one ... probably "yes", but just in case ... are you running 3.0.1 which came out last week? It fixes some of the bugs in the 3.0.0 release. Available as part of Software Upgrade or from the Apple site.

Good luck.

Frank Doorhof · « **Reply #2 on:** March 02, 2010, 03:49:08 pm »

Quote from: KirbyKrieger

Just one ... probably "yes", but just in case ... are you running 3.0.1 which came out last week? It fixes some of the bugs in the 3.0.0 release. Available as part of Software Upgrade or from the Apple site.

Good luck.

yes got the update. Thanks.

StuartOnline · « **Reply #3 on:** March 02, 2010, 04:28:53 pm »

Quote from: Frank Doorhof

Tomorrow I will start my sixth installation cycle.

When doing a app zap of all Aperture files and installing 3 fresh it will work fine for maybe 2-3 starts and after that it will just crash when opening, it never opens, the icon jumps one time and that's it.
I have disabled faces already, my database is on a fast drive and I've tried rebuilding it many times.

Working within Aperture 3 under Snow Leopard 64 bits is reasonable stable, although sometimes I wonder what's going on and than it works again.

It's frustating as can be because I use Aperture a lot and now it's custom to just install it every other day to be able to work with it.

Anyone an idea ?

there are NO filters installed.

I had some problems until upgrading to 3.01. Now I also just last week upgraded my MacBook Pro 2.66 (June 2009) from 4GB DDR3 to 8GB DDR3.
My feeling that also helps. Also running the system in full 64 bit mode. I should mention that my libraries are on an external probable hard drive running with Firewire 800.

Frank Doorhof · « **Reply #4 on:** March 02, 2010, 04:40:11 pm »

I'm running a macpro 8 core with 12gb so that shouldn't be a problem.
I will instaal from scratch again tomorow and rebuild the db again to see if that helps.
Only did that twice ;(

StuartOnline · « **Reply #5 on:** March 02, 2010, 04:54:56 pm »

Quote from: Frank Doorhof

I'm running a macpro 8 core with 12gb so that shouldn't be a problem.
I will instaal from scratch again tomorow and rebuild the db again to see if that helps.
Only did that twice ;(

Well, I see you have a more powerful system then I do, so that may not be the problem.
The only thing I can think of is did you install from a CD or down load the program?
I did a down load myself (trial version) and then purchased a license.
Also did what Apple suggested and changed the name of Aperture 2 before installing Aperture 3.
Now if you down loaded the program may be something happened during down load.
Buy anyway just a thought.

KirbyKrieger · « **Reply #6 on:** March 02, 2010, 08:20:45 pm »

Quote from: Frank Doorhof

yes got the update. Thanks.

Cool.

OK, next suggestion: don't import your library. Import the included sample library (onto the same HD as Ap3), and put Ap3 through its paces. Try to break it. Then import some new photos from whatever you use, and try to break it again. The idea, of course, is to see if it's your database which is choking Ap3, or something further upstream. (Apologies if you've already done this as well.)

I'm running the Trial on a MBPro w. 4GB, dual monitor set-up, and have yet to crash it.

Good luck.

Frank Doorhof · « **Reply #7 on:** March 03, 2010, 03:30:49 am »

I did a clean install with the original CDs.
I've updated the new update and started with a repair database, it's on 0% for app 10 minutes now
Will start it again with rebuilding.
This is really driving me nuts, since I switched to Apple I never had such problems with software.

Frank Doorhof · « **Reply #8 on:** March 03, 2010, 04:02:56 am »

rebuilding does seem to work, at least I see something happening.
Keeping my fingers crossed.

StuartOnline · « **Reply #9 on:** March 03, 2010, 08:35:24 am »

Quote from: Frank Doorhof

rebuilding does seem to work, at least I see something happening.
Keeping my fingers crossed.

Great! Hope Aperture 3 keeps working for you.

Frank Doorhof · « **Reply #10 on:** March 03, 2010, 11:43:31 am »

Well the rebuild is done and it still starts....
so let's see if that also is true tomorrow.

JonRoemer · « **Reply #11 on:** March 03, 2010, 11:57:28 am »

Quote from: Frank Doorhof

Well the rebuild is done and it still starts....
so let's see if that also is true tomorrow.

Hopefully, your issues are solved. I don't have an answer but can say on my Mac Pro ('06, Dual-Core 2x 3ghz, 12gb ram, 10.6.2) I'm not having any issues like you are. Start up is very very fast, as is quitting. Same on my MacBook Pro.

I have had a crash or two in Aperture and while I don't want to discount that - PS CS4 tells me it has crashed almost every time I close it (even though I've told it to close).

Theodore · « **Reply #12 on:** March 04, 2010, 10:50:46 pm »

I hope that you've got it solved. You mentioned zapping all of your Aperture files, so I assume that you got rid of Aperture 2 on the machine? I have a very similar desktop to you: an 8-Core MacPro with 12 gigs of RAM (early 2008) with my image files stored on a 2nd gen Drobo and backed up to another 2nd gen drobo. The weak link in that speed chain is obviously the Drobo because it's not the SATA DroboS, but even still everything is pretty snappy - much faster than LR2 - and seems stable and fine so far. So that's one comparative report from someone with similar hardware. As one additional point, I just let Snow Leopard boot in 32-bit (normal) at this point.

Frank Doorhof · « **Reply #13 on:** March 05, 2010, 02:30:36 am »

At the moment it seems to work.
It's much snappier than before, I did a rebuild database for the third time with this installation so let's hope that with the updates etc. and the rebuild it now keeps working.

StuartOnline · « **Reply #14 on:** March 05, 2010, 07:08:44 am »

Quote from: Theodore

I hope that you've got it solved. You mentioned zapping all of your Aperture files, so I assume that you got rid of Aperture 2 on the machine? I have a very similar desktop to you: an 8-Core MacPro with 12 gigs of RAM (early 2008) with my image files stored on a 2nd gen Drobo and backed up to another 2nd gen drobo. The weak link in that speed chain is obviously the Drobo because it's not the SATA DroboS, but even still everything is pretty snappy - much faster than LR2 - and seems stable and fine so far. So that's one comparative report from someone with similar hardware. As one additional point, I just let Snow Leopard boot in 32-bit (normal) at this point.

I currently have about 16,000 images in my library that are mostly Raw.
Now my libraries are on external (portable) Lacie portable hard drive (320 GB) firewire 800 and the Iomega (portable) eGo FireWire 800.
I am running on a MacBook Pro 15" in 64 Bit mode 2.66 8GB DDR3 (June 2009) LED Cinema Display (24" flat panel) Mac OS X (10.6.2)
So far I have not had any real problems.

Frank Doorhof · « **Reply #15 on:** March 12, 2010, 01:59:11 am »

Seems to be working now
No crashes over the last 4 days.

Author Topic: Aperture 3 keeps crashing on startup (Read 8329 times)