Pages: [1]   Go Down

Author Topic: whats going on with my monitor?  (Read 2095 times)

StuartRH

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
whats going on with my monitor?
« on: December 19, 2009, 04:10:23 am »

I have a strange issue with my calibration?, the bit I am concerned about is the results on the input and output screen and the 'line' not going to the corner for the blacks.

Any advice to on what to do next and what has happened would be helpful.

I have attached a picture of the final calibration page.
« Last Edit: December 19, 2009, 04:14:00 am by StuartRH »
Logged

PeterAit

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4559
    • Peter Aitken Photographs
whats going on with my monitor?
« Reply #1 on: December 19, 2009, 09:49:12 am »

Quote from: StuartRH
I have a strange issue with my calibration?, the bit I am concerned about is the results on the input and output screen and the 'line' not going to the corner for the blacks.

Any advice to on what to do next and what has happened would be helpful.

I have attached a picture of the final calibration page.

It looks like the calibration sensor is reading some light even when the monitor is supposedly displaying pure black. Did you make sure there is no ambient light that could be causing the problem?
Logged

StuartRH

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
whats going on with my monitor?
« Reply #2 on: December 19, 2009, 06:25:42 pm »

I've tried with no ambient light, still no different...
Logged

Ethan_Hansen

  • Full Member
  • ***
  • Offline Offline
  • Posts: 114
    • Dry Creek Photo
whats going on with my monitor?
« Reply #3 on: December 19, 2009, 07:09:17 pm »

I have seen this behavior with i1-D2 pucks that were dying. Download and run the i1 diagnostics from X-Rite's site.

StuartRH

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
whats going on with my monitor?
« Reply #4 on: December 21, 2009, 06:39:12 pm »

I have run the diagnostics and it works o.k.
Logged
Pages: [1]   Go Up