Pages: [1]   Go Down

Author Topic: 7600 Maintenance question  (Read 1217 times)

photomike

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
7600 Maintenance question
« on: December 15, 2009, 02:26:34 pm »

I was just looking at my 7600 that has run tens of thousand of prints through it and I see inside that there are foam pieces on the path that the head takes.  I am seeing some, okay a lot, of ink build up.  Can these be removed?  If so how?  Tried getting them out but they do not want to come and I hate to break it.  Can they just be washed or do they need to be replaced?

Thanks,
Logged

Scott O.

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
    • Photography by Scott and Joyce
7600 Maintenance question
« Reply #1 on: December 16, 2009, 12:54:02 pm »

Check out Spectrflow's web site (http://www.spectraflow.com/tech-tips.html).  Tip #9 talks about something they call "Puddling the Cap".  Interesting name, the technique might help clean your printer head.  I did it on mine and it helped, although it took a couple of times.
Pages: [1]   Go Up