Pages: [1] 2 3   Go Down

Author Topic: Trimmer advice sought  (Read 23258 times)

howardm

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1984
Trimmer advice sought
« on: February 07, 2009, 01:00:24 pm »

So with my 3800 printer, it seems like I'm going to need a good trimmer, sometimes for large prints, sometimes for mundane things like cutting fine art paper into smaller proof sizes ($$).  I think I've decided on the Dahle Pro series (can't justify the Rotatrim I think) and in that, maybe the 554 which is a 28" max cut vs. the 552 which is a 20" cut.  The 554 is pretty big already w/ a base size of 36x14 (vs. the 552 @ 27x14).  

I have visions of the 20" cut not being enough when I need it but I'm prone to overbuying/oversizing (as most of us are).  I do like pano's though
and they can be up to 38"

Your thoughts?  How has your real usage meshed w/ what you thought when you bought?  Honestly, at no point in the future do I think I'd have more
than a 24" printer (and even thats a stretch)

Thanks.

vgogolak

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 344
    • http://
Trimmer advice sought
« Reply #1 on: February 07, 2009, 06:47:50 pm »

just get the Rotatrim. it just works. Expensive? yes, but the dual rail and overall quality are tops (i've had one forever, and it is like new)
well, a chevy will get you from a to b
so will a mercedes
is it worth it?
to some, yes
Victor
Logged

sesshin

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 94
    • http://
Trimmer advice sought
« Reply #2 on: February 07, 2009, 07:38:22 pm »

I have both a Dahle and a Rotatrim professional models and my opinion is the Rotatrim is definitely a much better product. The Dahle will serve as an adequate cutter, its just very light and flimsy compared to the Rotatrim which is solidly built. having a sturdy cutter makes the act of cutting easier also.
Logged

Bob Smith

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 83
    • http://www.accurateimage.org
Trimmer advice sought
« Reply #3 on: February 07, 2009, 08:11:37 pm »

Buy the RotoTrim.  It's one of those things where you'll wonder how you did without it.  I bought a Dahle.  Kept it a few months then got a Rototrim.  There's no comparison.  The Rototrim is vastly more precise... and will stay that way through years of use.  I wish I had bought one years earlier.

Bob Smith
Logged

Jeff Magidson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 191
    • Artslides Digital Imaging
Trimmer advice sought
« Reply #4 on: February 07, 2009, 08:51:31 pm »

I have to agree with the above posters. I resisted the expense of the Rotatrim, by first buying a Dahle. Then I upgraded to a monorail Rotatrim only to get frustrated with it during heavy use. I then bought a 24" dual rail Rotatrim and It is a joy to use! My trying to be prudent really backfired. This is a good case of " You get what you pay for ". The dual rail Rotatrim is really worth the extra money.

Logged
~ Jeff Magidson
Custom Archival Printing
http://artslidesboston.com

namartinnz

  • Full Member
  • ***
  • Offline Offline
  • Posts: 220
Trimmer advice sought
« Reply #5 on: February 07, 2009, 11:32:12 pm »

Yes, I have to agree with the others. I used to have a small Dahle trimmer, but then upgraded to a 36" Rotatrim. Only regret was I later bought a 44" Z3100 so needed to buy the 54" version - worth every cent.

neil snape

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1447
    • http://www.neilsnape.com
Trimmer advice sought
« Reply #6 on: February 08, 2009, 04:27:21 am »

I had other trimmers but none as good as the top of the line Rotatrim I use now. The only thing I should have done is bought one at least one size up as we are all going to get a bigger printer eventually!
Logged

brianrybolt

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 625
Trimmer advice sought
« Reply #7 on: February 08, 2009, 05:31:25 am »

It's a no brainer - Rotatrim.  Don't eat for a few days.

Cheers,  Brian

hjscm

  • Newbie
  • *
  • Offline Offline
  • Posts: 33
Trimmer advice sought
« Reply #8 on: February 08, 2009, 10:08:12 am »

I feel really dumb for just seeing this thread. Just bought a dahle 36" a week ago.  not to impressed by it.  What is the main difference in the rotatrim?  what would i like better and which one to buy?  I have an epson 7990.  Can it cut poster board?  my dahle doesn't do inches which sucks.  it has it on the side but no lines extend out.
Thanks
chris
Logged

Justan

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1928
    • Justan-Elk.com
Trimmer advice sought
« Reply #9 on: February 08, 2009, 11:14:06 am »

I've learned a lot of highly useful things form this site, including recently another member suggested I get a Rotatrim as a paper trimmer. I did some investigation and found that these are pricy little gems. Well, okay, they are not “little,” but my search lead me to a way to search Craigslist (all craigslist where English is used) and found a 36” one in an ad on the east coast. I contacted the seller, who wanted to know how I found them. I told them about the search tool and per his ad, the seller parted with it for $175 and I paid the shipping costs. What a score! It was in good condition when I received it and it makes perfect cuts down to hair-fine thinness.

I would recommend to anyone to use the search tools available and be patient, you’ll end up with a great value and save a lot. Here’s the link that showed me how to search across all Craigslist sites: http://lubethemind.com/2008/07/31/search-a...ce-with-google/

howardm

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1984
Trimmer advice sought
« Reply #10 on: February 08, 2009, 12:50:48 pm »

you guys are killing me.  I was really hoping for a 'the Dahle is fine'.  

OK, Ramen noodles it is for a while  

Bob Smith

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 83
    • http://www.accurateimage.org
Trimmer advice sought
« Reply #11 on: February 08, 2009, 02:01:44 pm »

Quote from: hjscm
What is the main difference in the rotatrim?  what would i like better and which one to buy?  I have an epson 7990.  Can it cut poster board?

The main difference is build quality and precision.  You can predictably make cuts as fine as a hair's width if you need to.  And it will maintain that precision through years of use.

I manage a photo lab in a college fine arts program.  We made a lot purchase of a pile of old darkroom gear last year.  I agreed to the purchase primarily because it contained a 24" Rototrim.   It was obviously numerous years old and well used but it still cuts perfectly.  After a years worth of student pounding, it's still working just fine.

In my business, I print a little on Epson Enhanced Matte Posterboard.  My Rototrim can handle that just fine but that's probably about it's limit.

I have two of the 44" Epsons but my Rototrim is only the 24" model.  The cuts where I need the most precision are generally on smaller prints. I also find the smaller trimmer more convenient for general work.  I have a large (4x8) table covered with a self healing cutting surface.  I use a good straight edge and knife on that for the large cuts.  Someday I'll probably spring for a large Rototrim but I don't feel like I absolutely need it.  On the other hand I couldn't do without my 24" trimmer.

Bob Smith
Logged

abiggs

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 555
    • http://www.andybiggs.com
Trimmer advice sought
« Reply #12 on: February 08, 2009, 02:21:46 pm »

Hey guys, I will be selling my Rotatrim 24" in the next few weeks. I need a much larger model for my 44" iPF 8100 printer.

:-/
Logged
Andy Biggs
[url=http://www.andybiggs.com

howardm

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1984
Trimmer advice sought
« Reply #13 on: February 08, 2009, 02:40:49 pm »

Andy,

I sent you a message

hjscm

  • Newbie
  • *
  • Offline Offline
  • Posts: 33
Trimmer advice sought
« Reply #14 on: February 08, 2009, 06:34:20 pm »

Thanks for the reply. which model should i get?  i am thinking of the 30" but i see different models.  the dahle is hard to get close trims cause there is no guide where the cutter is.  i have to eye it and hope that it is where i want it.  how is the rotatrim?  can you put the cut right where you want it?

thanks again
Logged

howardm

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1984
Trimmer advice sought
« Reply #15 on: February 08, 2009, 06:45:36 pm »

I'm looking at the Rotatrim M24 although apparently, they now have a lower priced line using a single rail

wtlloyd

  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
Trimmer advice sought
« Reply #16 on: February 08, 2009, 08:37:38 pm »

There is an alternate. It is an exact copy of the Rotatrim. It used to be (and the one I have is) called "Kodak Professional M3 Rotary Trimmer". I bought mine at Samy's camera a couple years ago. I compared it in store, side by side, to a Rotatrim. I couldn't see any difference whatsover. It has worked perfectly, allowing a hair trim if needed. It is now sold as "Saunders Professional M3 Rotary Trimmer. It looks identical to mine in the picture here: http://www.bhphotovideo.com/c/product/5148...r.html#features

It's also sold at Amazon and elsewhere on the web...here's a product sheet on the trimmer: http://www.tiffen.com/userimages/SaundersM3Trimmer_SS.pdf

It's rock solid, double rail, and still sharp 4 years later. I only use it a few times a month, but it shows no signs of wear as of yet...I have a 24" model, and it is ample for my Epson 4800 use.

Notice that it sells for $100 less than the RotaTrim. I would buy one again over the RotaTrim.
« Last Edit: February 08, 2009, 08:43:48 pm by wtlloyd »
Logged

howardm

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1984
Trimmer advice sought
« Reply #17 on: February 08, 2009, 08:58:12 pm »

certainly looks very similar.  thanks for the info.

How about blade longevity and replaceability?

wtlloyd

  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
Trimmer advice sought
« Reply #18 on: February 10, 2009, 11:25:10 am »

I got an email back from Saunders regarding repairs/replacement parts. The phone # for parts is 800-645-2522


Quote from: howardm
certainly looks very similar.  thanks for the info.

How about blade longevity and replaceability?
Logged

dct123

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
    • http://www.dctomick.com
Trimmer advice sought
« Reply #19 on: February 10, 2009, 11:33:36 am »

Quote from: wtlloyd
There is an alternate. It is an exact copy of the Rotatrim. It used to be (and the one I have is) called "Kodak Professional M3 Rotary Trimmer". I bought mine at Samy's camera a couple years ago. I compared it in store, side by side, to a Rotatrim. I couldn't see any difference whatsover. It has worked perfectly, allowing a hair trim if needed. It is now sold as "Saunders Professional M3 Rotary Trimmer. It looks identical to mine in the picture here: http://www.bhphotovideo.com/c/product/5148...r.html#features

It's also sold at Amazon and elsewhere on the web...here's a product sheet on the trimmer: http://www.tiffen.com/userimages/SaundersM3Trimmer_SS.pdf

It's rock solid, double rail, and still sharp 4 years later. I only use it a few times a month, but it shows no signs of wear as of yet...I have a 24" model, and it is ample for my Epson 4800 use.

Notice that it sells for $100 less than the RotaTrim. I would buy one again over the RotaTrim.

The other day I saw a $60,000.00 Mercedes parked next to a $30,000.00 Hyundai. They looked exactly the same, except for name and model badges!
Logged
Pages: [1] 2 3   Go Up