Pages: [1]   Go Down

Author Topic: 4800 3rd party ink experience  (Read 1858 times)

natas

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 269
4800 3rd party ink experience
« on: January 06, 2009, 12:16:21 pm »

I was wondering if anyone here had experience with 3rd party inks for the 4800? The only 3rd party inks for this printer I have found are the MIS K4 inks. What I am concerned about is ink clogs, print life and of course the actual output.
Logged

Peter McLennan

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4690
4800 3rd party ink experience
« Reply #1 on: January 06, 2009, 01:53:09 pm »

View this thread for recent posts on this subject

http://luminous-landscape.com/forum/index....showtopic=30730
Logged

Light Seeker

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 255
4800 3rd party ink experience
« Reply #2 on: January 06, 2009, 10:42:13 pm »

There is a relatively new, and credible alternative worth looking at. . .

http://www.conecolor.com/

http://shopping.netsuite.com/s.nl/c.362672/.f

I've been using MIS Pro in a 2200 for a couple of years. I seem to clog more often than I recall with OEM inks, but my dry winters are a challenge for any inkset (25% relative humidity indoors). The cost savings is significant and the added bonus is that I can do a reasonable job on gloss, which was never possible with 2200 OEM inks.

I enjoy using Cone Piezography K7 inks for my black and white work and if I were in the market for bulk colour I would seriously consider Cone's colour solution.

Best wishes in making your decision.

Terry.
Logged

natas

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 269
4800 3rd party ink experience
« Reply #3 on: January 07, 2009, 12:27:14 pm »

Quote from: Light Seeker
There is a relatively new, and credible alternative worth looking at. . .

http://www.conecolor.com/

http://shopping.netsuite.com/s.nl/c.362672/.f

I've been using MIS Pro in a 2200 for a couple of years. I seem to clog more often than I recall with OEM inks, but my dry winters are a challenge for any inkset (25% relative humidity indoors). The cost savings is significant and the added bonus is that I can do a reasonable job on gloss, which was never possible with 2200 OEM inks.

I enjoy using Cone Piezography K7 inks for my black and white work and if I were in the market for bulk colour I would seriously consider Cone's colour solution.

Best wishes in making your decision.

Terry.

Wow the initial cost for the cone color is pretty high. They also claim no profiling needed. I wonder if anyone here uses this system and can say that the colors look identical.
Logged
Pages: [1]   Go Up