So, i went out and bought one of these beasts. Whoa....the wife is not happy this week. Between this and LR2.0!!
I have a couple of issues, potentially related.
1. Even though my graphics card (Radeon X600) handle the 1920x1200 res, and i was able to set this as so, i dont seem to be getting the correct res. When i plug it in using 15 pin mini Dsub (analogue), the corner of the monitor says 1600x1200. yet, when i plug it in (DVI DVI - digital) to the wifes Macbook pro (radeon x1600), the correct res 1920x1200 appears. So is this the card or the cable or both.
2. Calibration setting - D65, gamma 2.2, black point .5, White point 150, contrast ratio - default.
The problem -
a. During calibration this message appears "Max luminecence that can be acheived is 106. This is lower than target value. Auto adjustment will be made to maximum possible"
b. Caibration summary - WP 6490, Luminecence 103, Gamma 2.2, Contrast 1/255.
This baby has a max contrast ratio of 1/800, so i am not sure what went wrong. Contrast ratio = Black/White points = .5/150 = 300.
What i am i not understanding?
Should i set the contrast ratio to other than default?
IS this affected by the first issue?