Strange (non) printing behavior in LR

[David Eckels]

I have been trying to print a landscape on my ipf8400. As can be seen below, a test print (Job 3) does fine. Job 2 does not. Other than the size of the prints, all other printer settings are identical, yet Job 2 just hangs. No error messages, nothing. Even if I wait it out by taking a nap nada. Any advice?

From the status log:


Job 2
 User Name: David  Document Name: Lightroom (Matanuska Glacier River Valley copy.tif)
 Page Count: 0  Job Status: Comp   
 Print Start Time: 2017/09/04 12:16  Print End Time: 2017/09/04 12:16  Print Time: 0sec.
 Output Image Size: 1117.6 x 327.5 mm  Media Type: ArtSatin Canvas  I/F: Network
 Paper Area Consumed: 0.0000 m2  Paper Width: 0.0 mm  Paper Length: 0.0 mm
 Ink Consumed:PC:   0.000ml C:   0.000ml MBK:   0.000ml   Y:   0.000ml  M:   0.000ml PM:   0.000ml
               R:   0.000ml G:   0.000ml   B:   0.000ml PGY:   0.000ml GY:   0.000ml BK:   0.000ml


Job 3
 User Name: David  Document Name: Lightroom (Gamut_Test_File_Flat ProPhoto.tif)
 Page Count: 1  Job Status: Comp   
 Print Start Time: 2017/09/04 12:08  Print End Time: 2017/09/04 12:12  Print Time: 256sec.
 Output Image Size: 1117.6 x 279.4 mm  Media Type: ArtSatin Canvas  I/F: Network
 Paper Area Consumed: 0.3289 m2  Paper Width: 1117.6 mm  Paper Length: 294.3 mm
 Ink Consumed:PC:   0.047ml C:   0.121ml MBK:   0.035ml   Y:   0.152ml  M:   0.061ml PM:   0.050ml
               R:   0.056ml G:   0.063ml   B:   0.061ml PGY:   0.090ml GY:   0.080ml BK:   0.031ml

[David Eckels]

The original PSD from which I prepared the gallery wrapped form is printing fine. I can only say that during the gallery wrapping process, the image was over 1.5 GB and PS wanted to save it as a 16 bit a PSB. LR won't read PSB files, so I converted it to an 8 bit tiff (for some reason PS want to save it as a PSB even though the 8 bit mode reduced the file size to 750 MB. Help!