Pages: [1]   Go Down

Author Topic: Eizo CS2730 Calibration  (Read 552 times)

ChrisMax

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
Eizo CS2730 Calibration
« on: July 30, 2017, 05:10:32 PM »

I've had an Eizo CS2730 for two weeks and have spent a lot of time between Color Navigator and DisplayCal.  After calibration with CN the software is verifying that the calibration is right on but checking with DC everything is out of wack.  The thing is though the prints are turning out great and resemble what's on the screen.  One other mystery is that the video card can be in automatic mode or can be manually set to any color temperature though keeping it set at 6500k seems to be the best.  I've attached three test results, the first is from Color Navigator, the second is from DisplayCal testing the CN calibration with a GBr-LED spectral correction and the video card in auto mode, the third is DisplayCal same GBr correction testing the CN calibration and the video card on manual set to 6500K.  I'm wondering which program is correct Color Navigator or DisplayCal.

- Attachments and other options
« Last Edit: July 30, 2017, 05:18:45 PM by ChrisMax »
Logged
Pages: [1]   Go Up