I'm moving from my current P800 to the SC P5000. I had the 800 sitting on a nice black metal cabinet that worked "just right" as a printer stand, with nice storage for paper, ink, etc. below. Doing some quick measuring made me realize that the cabinet was woefully inadequate in area to accommodate the footprint of the 5000. The solution I came up with was to have a craftsman friend of mine turn the metal cabinet into "one leg" of a new table.
3x3" legs, and the cabinet through-drilled and six screws from underneath make the "table" one solid and very rigid piece. You can tell from the photo that the 800 doesn't take up much real estate. The 5000 will "just fit" on the left side of the table and there will still be adequate room for my little utility scanner. I now have room to the left of the cabinet to store my roll paper underneath.
Thought I'd share this. The cabinet wasn't all that expensive to start with, and the materials for the table top/legs was about $120 at the local big-box hardware place. The top is white "Formica" type material - easy to keep clean.
Also, if anyone is interested in "why" the upgrade from the 800 - I used to have a 4880 and was spoiled by the auto-cut, paper tray, etc. So that, and the slightly better gamut of the 5000 was enough to push me over the edge. I also very much like the roll/sheet auto switching. Hope it works as advertised.
Rand