Pages: [1]   Go Down

Author Topic: Grids for Para 88  (Read 1706 times)

DrakeJ

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Grids for Para 88
« on: August 05, 2016, 06:54:38 AM »

I'm curious if anyone has bought a grid from another brand than Broncolor for their Para modifier and simply used gaffer tape or something to hold it in place if it didn't fit 100%. Have a difficult time buying a grid for the money Broncolor asks out of principle.

UlfKrentz

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 457
    • http://www.shoots.de
Re: Grids for Para 88
« Reply #1 on: August 05, 2016, 12:20:49 PM »

I'm curious if anyone has bought a grid from another brand than Broncolor for their Para modifier and simply used gaffer tape or something to hold it in place if it didn't fit 100%. Have a difficult time buying a grid for the money Broncolor asks out of principle.

You may look at light tools, they also have very good stuff, I use these on my chimeras. Never seen the one from broncolor, so I cannot comment on it but I would avoid gaffer tape on the umbrella. The para has those little balls in the front you could easily use some C47 to fix a gel, diffusor or grid. But go and ask at Briese and youŽll consider broncolorŽs eggcrate a bargain ;-)

DrakeJ

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: Grids for Para 88
« Reply #2 on: August 06, 2016, 06:42:08 AM »

You may look at light tools, they also have very good stuff, I use these on my chimeras. Never seen the one from broncolor, so I cannot comment on it but I would avoid gaffer tape on the umbrella. The para has those little balls in the front you could easily use some C47 to fix a gel, diffusor or grid. But go and ask at Briese and youŽll consider broncolorŽs eggcrate a bargain ;-)

Thanks Ulf, I'll check it out.

In theory if I can find a grid which has about the same dimensions I would be able to attach it to the pins that stick out of the para and simply stretch it to keep it in place or use gaffer tape, even if you don't recommend that ;)

It would be interesting if someone else found a grid from another brand which could just be plug n' play.

FelixWu

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 70
Re: Grids for Para 88
« Reply #3 on: August 07, 2016, 06:33:29 AM »

Have you tried the grid from 3ft octa?
Logged

Conner999

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 648
Re: Grids for Para 88
« Reply #4 on: August 08, 2016, 08:37:00 AM »

I've tried a 3' octa grid (attached with bulldog clips)on the 88 - not quite large enough. You need something a shade larger. A grid from a 3x4' will fit - but you need to bundle up quite an excess.
Logged

DrakeJ

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: Grids for Para 88
« Reply #5 on: August 08, 2016, 02:50:07 PM »

I've tried a 3' octa grid (attached with bulldog clips)on the 88 - not quite large enough. You need something a shade larger. A grid from a 3x4' will fit - but you need to bundle up quite an excess.

So basically a grid the size of a 100cm (3.3ft) octa should do the trick. If only Elinchrom made cheap grids...
Pages: [1]   Go Up