Topic: P1 IQ3-100 images? (Read 38541 times)

Graham Welland · « **Reply #100 on:** January 30, 2017, 10:07:07 am »

XF & 35LS

Paul2660 · « **Reply #101 on:** January 30, 2017, 10:14:35 am »

Nice shot. Love the broken ice.

Paul Caldwell

cgarnerhome · « **Reply #102 on:** January 30, 2017, 11:28:33 am »

Where was the image taken? Very nice indeed.

Graham Welland · « **Reply #103 on:** January 30, 2017, 11:58:59 am »

That was a very unusual morning in Yosemite. The meadows were flooded, froze, broke up and refroze and then snow for good measure.

Yosemite Falls across Cooks meadow.

algrove · « **Reply #104 on:** January 31, 2017, 07:58:03 am »

Is this a recent capture like in the last week or so?

Bo_Dez · « **Reply #105 on:** February 01, 2017, 01:12:12 pm »

Correct me if wrong but Phase One DF owners are locked out of the IQ100 backs

?

H owners, any old H, can use the 100 backs.

So Phase One owners are forced to either buy the very expensive XF system, or just switch to Hasselblad.

That has got to be the dumbest move ever!

Paul2660 · « **Reply #106 on:** February 01, 2017, 01:28:43 pm »

Or upgrade to the much less expensive DF+, as it is compatible. It's not sold new anymore but there are a lot in used inventory.

Paul Caldwell

Bo_Dez · « **Reply #107 on:** February 01, 2017, 07:43:29 pm »

Is that right?

The Phase One compatibility pdf says the 100 backs are H and XF mount only.

The 50, 60, 80 are H, XF and P (DF and DF+)

Please correct me if I'm wrong!

Paul2660 · « **Reply #108 on:** February 01, 2017, 09:36:58 pm »

Under the IQ back compatibility page, it appears XF, stands for DF, DF+ and XF. It's at the very bottom of the 1st page. Under Mount options, there is an asterisk, which at the bottom shows:

Mount options*
XF: XF, DF+ and DF

I assume this means the IQ3100 works on all of them.

Paul Caldwell

Bo_Dez · « **Reply #109 on:** February 02, 2017, 05:50:20 am »

Ah you are right, thanks for pointing that out and sorry for the confusion. I just went straight to P which says DF and DF+ too.

MediumFormat · « **Reply #110 on:** February 09, 2017, 11:27:51 pm »

The silence & beauty of Yosemite in winter
IQ3-100 + P1 240mm

MediumFormat · « **Reply #111 on:** February 14, 2017, 12:42:30 am »

The silence & beauty of Yosemite in winter
IQ3-100 + P1 240mm

gagemanning · « **Reply #112 on:** February 26, 2017, 07:42:03 am »

Here is a recent picture taken at Juno Pier in Florida with the Phase One IQ3-100, Cambo WRS-1600, and Rodenstock 32mm f4 HR Digaron-W

www.gagecaudell.com

razrblck · « **Reply #113 on:** February 26, 2017, 08:52:42 am »

Love this thread!

dchew · « **Reply #114 on:** February 26, 2017, 12:31:04 pm »

October in Glacier National Park.
90-hrsw, Alpa STC. 2 Image stitch (shift 18mm L/R).

Dave

Paul2660 · « **Reply #115 on:** February 26, 2017, 01:07:03 pm »

Thats a keeper for sure. Great shot.

Paul Caldwell

gagemanning · « **Reply #116 on:** February 26, 2017, 04:32:36 pm »

Quote from: dchew on February 26, 2017, 12:31:04 pm

October in Glacier National Park.
90-hrsw, Alpa STC. 2 Image stitch (shift 18mm L/R).

Dave

Absolutely perfect!

Gage

Sent from my iPhone using Tapatalk

Smoothjazz · « **Reply #117 on:** February 27, 2017, 04:28:22 pm »

Steven,

These stands of Aspens are great. May I ask where you go to find these great groups of trees? I am in California, but usually find the trees here, or in Wyoming are more spread out.
Thanks,

John

stevenfr · « **Reply #118 on:** February 27, 2017, 04:37:39 pm »

Hi John

Thanks for the feedback on my aspen images. Aspens grow from the Yukon/Alaska area all the way to New Mexico. Areas that are close to you include the Eastern Sierra and Colorado. Usually at the end of September first week of October is prime Aspen time.

Steven

http://www.friedmanphoto.com

stevenfr · « **Reply #119 on:** February 27, 2017, 04:54:26 pm »

Four from Death Valley.

Steven

http://www.friedmanphoto.com

Author Topic: P1 IQ3-100 images? (Read 38541 times)