Raw & Post Processing, Printing > Printing: Printers, Papers and Inks
Epson 3880 default Network setting
greyscale:
Am wondering If it is just mine, or all 3880 default to the network disabled upon power on?. Drives me nuts, I always have to remember to ENABLE the network on the top panel. I have assigned the printer a static address hoping this would change the network to remain ENABLED, but still have to Enable on the panel.
FWIW, I do power off the unit in order to protect it from summer storm power outages and sags.
Greyscale
PS: does the P800 behave this way????
howardm:
My 3800 and 3880 both power up w/ network *enabled* as they should.
You either have a weird unit or not setting/saving the enable state correctly.
Jeff-Grant:
I have two network attached 3880s, and have never looked at the network settings. They just came up via DHCP and never missed a beat.
hugowolf:
Never had a problem with mine. Although it is very rare that it is powered down, when it does power up it has no problem with its static IP address.
Brian A
greyscale:
Thanks to all for the replies. I must have a zonky network card in mine.
greyscale
Navigation
[0] Message Index
[#] Next page
Go to full version