Pages: [1]   Go Down

Author Topic: Epson 3880 default Network setting  (Read 1519 times)

greyscale

  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
Epson 3880 default Network setting
« on: July 06, 2015, 12:44:41 pm »

Am wondering If it is just mine, or all 3880 default to the network disabled upon power on?. Drives me nuts, I always have to remember to ENABLE the network on the top panel.  I have assigned the printer a static address hoping this would change the network to remain ENABLED, but still have to Enable on the panel.
FWIW, I do power off the unit in order to protect it from summer storm power outages and sags.

Greyscale
PS: does the P800 behave this way????
 
Logged

howardm

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1984
Re: Epson 3880 default Network setting
« Reply #1 on: July 06, 2015, 12:48:15 pm »

My 3800 and 3880 both power up w/ network *enabled* as they should.

You either have a weird unit or not setting/saving the enable state correctly.

Jeff-Grant

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 568
    • http://www.jeff-grant.com
Re: Epson 3880 default Network setting
« Reply #2 on: July 06, 2015, 05:24:08 pm »

I have two network attached 3880s, and have never looked at the network settings. They just came up via DHCP and never missed a beat.
Logged
Cheers,
 Jeff  www.jeff-grant.com

hugowolf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1001
Re: Epson 3880 default Network setting
« Reply #3 on: July 06, 2015, 08:11:47 pm »

Never had a problem with mine. Although it is very rare that it is powered down, when it does power up it has no problem with its static IP address.

Brian A
Logged

greyscale

  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
Re: Epson 3880 default Network setting
« Reply #4 on: July 07, 2015, 12:12:14 pm »

Thanks to all for the replies. I must have a zonky network card in mine.

greyscale
Logged

greyscale

  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
Re: Epson 3880 default Network setting
« Reply #5 on: August 02, 2015, 05:08:59 pm »

Finally, figured the (perceived) problem.  Reading the Epson Network Guide, Specifically, Steps 13, 14 and 15. Now the 3880 powers on with the correct Ip address every time.

greyscale
Logged
Pages: [1]   Go Up