Luminous Landscape Forum
Raw & Post Processing, Printing => Other Raw Converters => Topic started by: aduke on July 05, 2014, 07:08:11 pm
-
Chasing through the documentation, it appears to me that it should. The question is, does it?
Alan
-
No, it does not.
-
For what it's worth, I export from SPP as neutral as possible (including backing off the sharpening from zero quite considerably) as 16-bit TIFF ProPhoto. In RawTherapee, I select ProPhoto working space (RT's default) and 'use embedded profile if possible'.
It's a pain going from one app to another but, for my SD9/SD10 X3Fs, the results are way superior to my alternative of ACR 5.4/ PSE 6.
cheers,
-
For what it's worth, I export from SPP as neutral as possible (including backing off the sharpening from zero quite considerably) as 16-bit TIFF ProPhoto. In RawTherapee, I select ProPhoto working space (RT's default) and 'use embedded profile if possible'.
It's a pain going from one app to another but, for my SD9/SD10 X3Fs, the results are way superior to my alternative of ACR 5.4/ PSE 6.
cheers,
I, too, export a neutral TIF from SPP. However, the performance of SPP, while never good, is abysmal on my notebook and virtually impossible to use while in the field.
So, I am looking for something else to do light processing on X3F files.
Alan
-
Iridient is a valid alternative (Mac only)
-
I, too, export a neutral TIF from SPP. However, the performance of SPP, while never good, is abysmal on my notebook and virtually impossible to use while in the field.
So, I am looking for something else to do light processing on X3F files.
I do understand, Alan. That is why I'm sticking with my SD9 and SD10 and SPP 3.5. I've occasionally downloaded Merrill X3F's onto my oldish desktop computer and opened them with SPP 5.5.3 and, to be frank, I don't see how anyone puts up with it. Especially that sad trick of editing a 'smaller' version unless you push this button and then go and make coffee while it loads. Rant over.
RawDigger can open Merrills and export an RGB 8bit TIFF of sorts pretty quick, but I doubt that's the kind of workflow you're looking for. FastStone Viewer can extract the full-size JPEG but I'm sure you don't want to do that either . .
. . . not much help am I? How about buying a Mac and using Iridient? [edit, someone just mentioned that]
-
Unfortunately, these Sigmas with their Foveon sensors need a completely different demosaicing algorithm than the rest of the cameras (Bayer sensors). It is not hopeless, however: Fuji X-Trans sensor support is on the way (the X-Trans sensors are also different from Bayer's).
Maybe you could post on the RT forum ("http://rawtherapee.com/forum/" in the "feature request" section) so that the developers will be more inclined to do it...
-
Unfortunately, these Sigmas with their Foveon sensors need a completely different demosaicing algorithm than the rest of the cameras (Bayer sensors). <>
Just to be clear, the Sigma raw data needs no 'demosaicing' - it is already 3 separate analog channels straight out of the sensor. For conversion, the 3-column raw data is passed through 3x3 matrices with no interpolation involved.
picky, I know ;)
-
Aren't sigma files interpolated to a higher resolution than resolution of each of the R,G,B layers?
-
Aren't sigma files interpolated to a higher resolution than resolution of each of the R,G,B layers?
Hello Michael,
If I understand the question correctly, my answer is 'no'. The spatial, or geometric, image resolution at the sensor is that of any one of the layers, and certainly not 'X3' as Foveon originally claimed. With their later cameras, Sigma uses the expression 'equivalent of' - which is a little better. But my '10MP' SD9 still outputs 3.4MP images - even when exported raw from utilities like dcraw, RawDigger, CEZEOx3fReader and the like.
cheers,