Luminous Landscape Forum
Equipment & Techniques => Cameras, Lenses and Shooting gear => Topic started by: John Camp on September 20, 2005, 03:37:54 pm
-
Couldn't you just time-sample the sensor?
JC
-
Photo sensors, like film, are light integraters over time, just summing the photons over a fixed time (shutter speed). Without a shutter, the photo sensors would be full, like over exposed film.
-
While it is possible to cut off the photosites' ability to capture photons to an electrical charge electronically, and some CCD designs do this, it requires additional circuitry on the sensor chip. This reduces the percentage of the chip area devoted to photo sensors, and increases power consumption, both of which increase noise and reduce dynamic range. As a result, Canon has dispensed with this circuitry in their CMOS sensors and uses a mechanical shutter.
-
Some sensors can do electronic shuttering, including the Matsushita interline CCD sensor of the original EOS-1D and the Sony interline CCD's in various Nikon and other brand DSLR's. This is what lets some of those cameras have 1/500s flash sync speed.
But aparently 1/500 is the limit for that electronic shuttering, so a focal plane shutter is still needed for higher shutter speeds. And as Jonathan suggests, there are probably costs for this that in terms of image quality.
It is similar to the cost of wiring a DSLR sensor for video-out capability. Interline CCD was invented to provide the video out capability that Full Frame Transfer CCD did not have, at the penalty of leaving less space for electron wells. This is one reason to expect interline CCDs to disappear from DSLR's, in favor of CMOS and FFT CCD. CMOS can have "random access read-out" of pixel values, which might allow video out with less or no penalty.