Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: kestelyn on February 24, 2014, 01:30:59 pm
-
Hi,
i just bought a new hasselblad battery for my H3D.
and after charging i won't go over the 45% full. i did try the battery reset but still it shows only 45% full.
when i plug it in to the charger after some minutes it goes to tickle charging (blinking led) could it be a faulty battery?
-
It could be a faulty battery, remember to do the reset with the viewfinder and lens removed.
-
Hi,
i just bought a new hasselblad battery for my H3D.
and after charging i won't go over the 45% full. i did try the battery reset but still it shows only 45% full.
when i plug it in to the charger after some minutes it goes to tickle charging (blinking led) could it be a faulty battery?
Make sure you are holding down the flash and menu buttons simultaneously while inserting the battery grip. It should make a sort of whirring sound/beep when you insert it. If it doesn't, try it again.
If it still only shows 45%, then it could just be end of life. Have you tried a different charger? Do you know if the charger charges any other grips ok?
Steve Hendrix
Capture Integration
-
Steve Hendrix just hit 1000 posts, kudos!
-
Steve Hendrix just hit 1000 posts, kudos!
Mazel Tov Steve!
-
Steve Hendrix just hit 1000 posts, kudos!
Hah - didn't even notice!
What do I win? ::)
Steve Hendrix
Capture Integration
-
reset finally worked after cleaning the contacts with ethanol.
no it shows 100%, now waiting how long it lasts en if it charges ok now.
thanks for the tips
-
after a recharge of 12hrs it shows 90%
should i try to reset it again or is it because its new and need several charges before reaching full cap.?
-
The batteries do indeed seem to need a few charge/discharge cycles before coming up to full capacity.
Nick-T
-
Also, it has been advised that the very first time you charge the battery (before you ever use it), charge it at least 12-24 hours. Use it all up, then repeat. It is similar to how we use to deal with conditioning batteries. I'm not sure why this is still necessary - or beneficial, at least - for optimal charge performance, but it is recommended.
Steve Hendrix
Capture Integration
-
Thanks, will try that.