Luminous Landscape Forum
Equipment & Techniques => Motion & Video => Topic started by: stamper on June 16, 2013, 06:28:48 am
-
I am thinking of getting a reasonable priced fluid head for my tripod with which to take movies. I haven't made up my mind as to which one. It will be in the price bracket £150/200 dollar range. What I have at present is the
http://www.srsmicrosystems.co.uk/6484/Giottos-MH1300-621-Ball-Head-with-Sliding-Quick-Release-Plate.html
I haven't used a fluid head and was wondering if the above is a reasonable substitute for a fluid head? TIA
-
No that's not a fluid head. I have just purchased a manfrotto 500ah for shooting moving image and shot with it last week on a 2 day shoot and was more than happy with its performance considering its low price.
-
There really is no such thing as a good inexpensive fluid head for video - you generally get what you pay for.
To look at the huge price range, I would start here (http://www.bhphotovideo.com/c/buy/Video-Tripod-Heads/ci/3918/N/4028759242)
When space and weight are at an absolute premium, I reluctantly use one of these (http://www.bhphotovideo.com/c/product/435028-REG/Gitzo_G2180_G2180_Series_1_Fluid.html), although operating it is pretty bad and it needs a leveling base (http://www.bhphotovideo.com/c/product/599684-REG/Acratech_1121_Leveling_Base_for_Tripods.html) to be usable.
If I was buying today, I would likely get a Miller.
Whatever you decide on, try it with your gear and do not buy 'blind'
-
There really is no such thing as a good inexpensive fluid head for video - you generally get what you pay for.
To look at the huge price range, I would start here (http://www.bhphotovideo.com/c/buy/Video-Tripod-Heads/ci/3918/N/4028759242)
When space and weight are at an absolute premium, I reluctantly use one of these (http://www.bhphotovideo.com/c/product/435028-REG/Gitzo_G2180_G2180_Series_1_Fluid.html), although operating it is pretty bad and it needs a leveling base (http://www.bhphotovideo.com/c/product/599684-REG/Acratech_1121_Leveling_Base_for_Tripods.html) to be usable.
If I was buying today, I would likely get a Miller.
Whatever you decide on, try it with your gear and do not buy 'blind'
Hey Chris, I am interested in buying a Miller Tripod and Fluid head for a 5 lb rig. There are so many choices out there and when I spoke to a couple sales reps they both tried to talk me into the most expensive options. Do you have any advice as to which one I should look at? I am trying to spend as least as possible, just getting this set up will be a stretch for me financially so if there is a model or combo that is a great buy I would be happy to know about it.
-
Again you get what you pay for and choice depends on your style of shooting.
For my style of fast-paced 'run & gun' & light-weight travel, I would go with the two stage carbon fibre legs and a Compass 20
There's a useful Philip Bloom video in the Item Demo at the B&H website (http://www.bhphotovideo.com/c/product/644496-REG/Miller_1034_1034_Compass15_Fluid_Head.html).
-
There are few things more annoying to a camera operator than an under-performing pan head. A poor one will bite you in the ass over and over again. A good one will make you look great forever.
Sachtler, O'connor, Cartoni.
-
There are few things more annoying to a camera operator than an under-performing pan head. A poor one will bite you in the ass over and over again. A good one will make you look great forever.
Sachtler, O'connor, Cartoni.
Don't forget vinten too: bbc, tve choice etc...
I think O'connor is my prefered with vinten.
-
After a couple of cheap Manfrotto video heads (few hundred bucks/pounds each) I finally bough a Sachtler SFB6. It was the cheapest which actually worked as it should. B&H sells it for $1750 with (wobbly...) sticks. The head alone is $1300. I married the new head with the old Manfrotto legs and the new Sachtler tripod with the sticky Manfrotto head, to be used with a cold cam. Now I have one smooth and steady rig, and one backup made of of rejects.
-
After a couple of cheap Manfrotto video heads (few hundred bucks/pounds each) I finally bough a Sachtler SFB6. It was the cheapest which actually worked as it should. B&H sells it for $1750 with (wobbly...) sticks. The head alone is $1300. I married the new head with the old Manfrotto legs and the new Sachtler tripod with the sticky Manfrotto head, to be used with a cold cam. Now I have one smooth and steady rig, and one backup made of of rejects.
Guess I'm gonna regret the 502HD I just ordered. Crap!