Luminous Landscape Forum

Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: huguito on June 14, 2013, 01:48:02 am

Title: Settings for Epson 9600
Post by: huguito on June 14, 2013, 01:48:02 am
Where do I find the settings for the platen gap in the print menu?
I am using this printer with a windows XP
Thanks

Hugo
Title: Re: Settings for Epson 9600
Post by: darlingm on June 14, 2013, 02:44:10 pm
IF the driver has a similar layout to the 9900, on the Main tab, click Paper Config.  Near the bottom is Platen Gap.
Title: Re: Settings for Epson 9600
Post by: huguito on June 14, 2013, 04:37:49 pm
Thanks
I will look again, I think that option is not there but is worth looking again
Title: Re: Settings for Epson 9600
Post by: Jim Metzger on June 17, 2013, 12:06:45 am
The 9600 is the same feature set as the 7600 and the platen gap is set on the printer itself. Very easy to do. Page 2-19 in the manual, available online.

Press "select type" so PRINTER SETUP appears.
press the > key twice to get to platen gap.
use ^ and V arrow keys to set platen width.
Press ENTER
Press Pause to hold the setting. Don't forget to switch back to STANDARD when done.
Title: Re: Settings for Epson 9600
Post by: huguito on June 18, 2013, 02:23:35 am
Thanks very much