Luminous Landscape Forum
Raw & Post Processing, Printing => Capture One Q&A => Topic started by: sunshine1234 on December 04, 2012, 07:27:22 am
-
Since entering the realm of digital photography I've always used Lightroom - I shoot Canon full frame DSLR. Is there a difference or advantage to using Capture One rather than Lightroom?
-
That is a question that you really need to answer for yourself. I recommend taking advantage of the free trial of C1 and see what you like or don't like about it. Everyone has different tastes concerning raw converters just like concerning the best beer, the best car, the best ______. What is best for one person may not be the best for you.
-
At one time C1 was FAST and a NO FUSS Capturing and RAW developing MACHINE! (3.7)
It made accurate files with excellent color, and razor sharp images. It was open to see all the folders at all times without crashes or jumping through hoops to do so.
(Imagine the 3.7 platform with the new engine, and some of the new sliders! That would be the ultimate developer!)
Today, It is more like the the big giant of an app with growth in many directions it forgot its original job....It is a ball of wax just to even start using the app.
I hesitate to launch it each time unless I have to. Before, when it was 3.7x... I honestly would get a smile. Imagine driving a Porsche GT2. I knew it was going to be a no fuss shoot. It didn't get in your way as it does now.
So, I honestly still love the dev engine, and even though I would imagine you can get the same results from LR. But I think to make a KEY image file to work from, I use C1 still, as I don't know or have the patients to mimmic the results, and I haven't yet sat down and run side by side tests in the results that are conclusive. When I did test it, It was a fast test and they were pretty much alike. That wasn't a good enough conclusion for me to drop C1. I still use 3.7 on the laptop to capture as each version required more hardware AND now 64bit OS spec with lots of RAM should be considered standard.
Besides.... I have to use C1, as LR doesn't support tethering to shoot Phase One backs.
If you're already using LR, I guess your short answer is.... When you have to shoot with a DB back.
I had to modify this post and add..... that at the end of the day (sounds like a bad politician), I DO like C1 files better for much of the jobs I work on. I do love the color stability. and a number of tools and functions. It is an application with many great and very effective tool sets. NO DOUBT. The biggest problems are with the MODALITY of the application and where it has cornered itself. These complexities and direction C1 has taken results in my overall experience in using it. How would you feel if you are taken out from the driver seat of a Porsche GT2 on the speedway, and now a captain of a cruise ship with 4 stops through the western pacific? I'm not sure how much sense that analogy makes, but I sure wish they make a Capture/DEVELOP only version of C1! What is the likelihood of that happening?
-
Thanks for the info - I didn't realize that LR doesn't support tethered shooting with P1 backs - this explains a lot....all the best....Michael
-
For myself, I think the latest version of C1 v7 does the best RAW conversions of files, substantially better, of any of the RAW converter application software. I have now been using it for my Canon files and going back and re-visiting my files from Leaf and Phase One backs. And using it for film scans. I think the image quality difference is astounding.
-
Thank you for your comments......How does it's catalogue and file retrieval system perform?
-
I don't have anything good to say about it as you will see my explanation in other posts...But, people who aren't aware of other DAMs or haven't used LR as a DAM...Or those that have no idea how to manage files..... might have positive feedback if they JUST got into the need for a DAM and JUST so happened to need C1.
Also to note...My response is to the direction C1 has taken by incorporating a DAM system within a Raw processor. Although I don't like the way they implemented the DAM, as I think LR does a much better visual and smooth adaptation to using a DAM within a RAW dev.... BUT, most of my feedback has been due to the direction they have taken.
ANYONE looking to manage their files, I highly recommend The DAM Book by Peter Krogh (Digital Asset Management for Photographers). The key word is "For Photographers". This can be so many things and workflows these days... My book version is from 2005. I have read more recent versions, BUT I wouldn't be surprised if he has made most recent versions with DAM and RAW developers like LR as one tool approach. This would be to commercial industry, NOT optimal method. He does give real world situations. In fact I had a large number of images before I read the book, since I use ACDSee (at the time trying other kinds of DAM apps as well), I was already following what he recommends. There are different routes he recommends depedning on different situations. He also has good approaches to backing up your content.
-
I started with C1 "back in the day". Back then, C1 was the king (speed and quality). Today, it's not true anymore. Some files come out better from LR and others from C1.
Until v7, LR kicked C1 butt in highlight recovery. The problem is that v7 is very unstable on many systems (some people report that don't have any problems). If you use digital backs, you pretty much have to use C1. Since you are shooting Canon, you have options.
Another thing to keep in mind is the cost. C1 is more expensive (without gaining much nowadays) than LR. Also, personally, I like better LR workflow (I used to love C1's workflow until they changed to v4 and subsequent versions).
Bottom line, take a few different files (something with a lot of white in bright sunlight, deep shadows, sunsets... or anything that you shoot regularly) and run the same files through both programs. This way you can compare what you can get out of both programs and see which one makes more sense to you.
Be prepared for a steep learning curve with C1. That's another problem after v3.7 (and compared with LR): not intuitive at all.
Foot note: I uninstalled v7 and put back v6; that's how bad it was (and I don't trust the latest update).
-
Until v7, LR kicked C1 butt in highlight recovery. The problem is that v7 is very unstable on many systems (some people report that don't have any problems). If you use digital backs, you pretty much have to use C1. Since you are shooting Canon, you have options.
v7 has been out for a few weeks; like any new major release it's got some kinks that will be worked out soon. Same with every software (just look at every major OS release Apple has ever put out). Also, as you note, on many (most?) systems 7.0.1 is running rock solid.
It's probably useful to note that Capture One is enormously popular in the major markets at rental studios (on rental computers), with digital techs, and in major catalog studios. It also has a very strong user base of non-pro enthusiasts (http://forum.getdpi.com/forum/medium-format-systems-digital-backs/41739-capture-one-7-its-doubled-my-mpixels.html).
It's probably fair to say that LR is more intuitive and that C1 is more powerful. As one example look at the number/type/control of sharpening/noise-reduction in C1 vs LR. There are more sliders (e.g. one specifically for single pixel noise that you often get in longer exposures) which makes it harder to learn but also more powerful (you can reduce the noise in specific ways; you have more control). Another example is color editing where LR's sliders are very simple and darn good, but also fairly rudimentary in their control and implementation; "color editor" in C1 is really hard for first timers to learn, but it's an incredibly powerful way to create different color responses and handle color.
C1 also has a lot more professional tethering tools built in. Capture Pilot, overlay, live-preview for dSLRS and digital backs, focus mask, dedicated floating focus checking windows etc.
C1 is also has a MUCH more customizable user interface than LR. Every tool, icon, and area of the program can be rearranged to fit your needs and your screen size. It works great on a dual 30" setup and it works great on a 13" laptop (or as great as anything can be expected to work on such a small screen). This, again, takes training (https://digitaltransitions.com/event/training) or a lot of time to learn, but offers more to those who need such flexibility and power.
Plus the color engine in C1 is really well renowned.
In other words, C1 is not trying to be mass-market prosumer. They are targeted squarely at pro users and image-quality oriented enthusiasts.
Several of the posters on this thread have long had their objections to the way C1 workflow is set up. These are well founded, intelligently formed objections - for THEM and for THEIR workflow needs/desires. After you look into C1 and it's workflow you may find you agree with these vocal detractors, or you may find (as many do) that the session workflow makes a lot of sense (or the Catalog workflow recently introduced in v7). I find it enlightening that these vocal detractors still use it despite feeling very strongly that it's setup/workflow is not the way they want to work; I think that speaks volumes about the image quality in C1 :-).
Definitely the best option is to download the trial and run some tricky files through it and compare for yourself.
-
...I find it enlightening that these vocal detractors still use it despite feeling very strongly that it's setup/workflow is not the way they want to work; I think that speaks volumes about the image quality in C1 :-).
Definitely the best option is to download the trial and run some tricky files through it and compare for yourself.
Or, it's maybe because of what I said earlier: SOMETIMES, the results are better from C1 and other times from LR. Your comment make it sound that it's ALWAYS the case. That is not true.
We do agree that he should try it for himself. And that's true with anything, not just C1.
-
Basically I never had any strange color problems with C1, ever. While LR4 is really good and has finally a RAW engine that is very good, I still have the on and off color cast issues that I never see with C1.
Until C1 v7, LR4 had two major features that where not there or in bad shape, that was Lens calibration and highlight recovery. With C1 v7 the highlight recovery is almost at the same level as LR4 and they included a lot of lenses with proper distortion removal, etc.
The one thing I truly miss in LR4 is a proper keystone correction, this is something that I use a lot in C1 v7.
Furthermore I like the detail color selection for manipulation more than the general selection you can do in LR4, plus it seems C1 lets me go more "wild" with how much I tweak colors.
What I also like in C1 are the Levels tools where I can "crop" the not used areas in a histogram. Similar thing can be done in LR4, but not in the same easy way I think.
What C1 had missing until v7 was DAM. Although it has now a catalogue, it is nothing what LR4 has. LR4 is just way better because it had that implemented since the first version. Easy tagging of keywords, maps, etc. This is just something that I utterly miss in C1 and where I do make heavy use of sidecar files to sync data from LR4 to C1 before I develop the RAW files in C1.
Although PhaseOne has a stand alone DAM tool called MediaPro, I never really liked it.
BTW, both have a huge gap in any good documentation. There are a lot of things in both programs that are just not or not enough documented in their "documentation".
-
Or, it's maybe because of what I said earlier: SOMETIMES, the results are better from C1 and other times from LR. Your comment make it sound that it's ALWAYS the case. That is not true.
We do agree that he should try it for himself. And that's true with anything, not just C1.
I was mostly referring to Phil who loves C1 but wishes it's overall workflow was different.
Also I was saying it largely in good fun, but I apologize if you felt it was misleading. So let me be clear: I would be the first to say that sometimes a specific file just looks best in LR, or Aperture, or Irrident Raw Developer. I may strongly dislike the way a given processor renders detail in one image, but find that same style of rendering actually works well on another image. Lightroom's circular sharpening artifacts for instance bother me in most of my portrait and landscape raws, but can look nice on abstracts and images with a lot of repeating geometric patterns.
My rule of thumb is if I'm going to be spending several hours on a given image that I should open it in each raw processor and play a bit in each one to see where I get. If I'm only spending several minutes on a given file I do in C1 every time - it has shown itself in my experience do to the best job on the widest variety of raws in the greatest range of adjustment. Of course I'm a very biased source for that comment (given that my day job is with a P1 dealer and P1 makes C1), but I shoot a lot on my own and the statement comes from that experience (and has broad support in discussions throughout the fora regarding image quality, detail, color, and toolset).
-
I was mostly referring to Phil who loves C1 but wishes it's overall workflow was different.
If the rental and digitech's is all C1 cares about, AND since it IS the only raw that captures with Phase One backs...it doesn't leave a LOT of hope. BUT it does leave a LARGE hole in the RAW market to be filled with such a superior developer. My question would be if there is light at the end of the tunnel for a 2 pronged C1 developer? ....
I just wish some big shot in C1 is reading and thinking..."Well how hard can it be to make a DB or ProLite version without all this session/catalog/extras, and keep the 3.7 method? We had it before!" ..And this big shot takes 3.7 off the dusty shelf and merges all the "good" tools (I am willing to consult with others in a group regarding priority tools) the sw engineers strip it down, and make it Bruce Lee, not Andre-the-Giant :-) (two of my favs in different ways).
This would have ALL the "non-pro-enthusiast" users shut their mouths AND you have just filled the gap by taking the FAST lane in the raw market. This allows a reason for MPro to dust itself off and really correct the small, and some core issues and run not only along C1, buT!! as a DAM for other markets. The ProLitre developer would be a hit with all others that use a dedicated DAM. Who are these DAM user people you may ask? Big Corp and major and minor companies! Along with any pro independent studio in just about any capacity.
After Doug put it in somewhat questionable perspective with this statement.....
It's probably useful to note that Capture One is enormously popular in the major markets at rental studios (on rental computers), with digital techs, and in major catalog studios. It also has a very strong user base of non-pro enthusiasts
You might add that C1 is in the C1 training market which kinda helps it being self fulfilling. And the lock-in users of Phase backs which you can only capture using C1 helps make this market.
This makes me wonder Doug...Are you saying if shooters don't rent digitechs or have C1 training, then they are just enthusiasts and not Pro's? "Pro" I would define as making 60+% income by just shooting (not print or other related sales).
I would also try and raise the level of pro with published work in major circulation magazines and those in event photography that are well established(although they may not use a MF DB, so they are not the locked in market). Also includes those independent photographers who shoot for agencies on hire, or direct to industry using DB... Is that good for being "pro"? I think the major cataloging studio market would love a alternat stripped down C1 app, as DAM apps are in place in these facilities. After the raw has processed the Key image, Out of C1 it goes.
I have over the years done the digitech renting, still do the studio catalog production. Are these "NON-PRO-Enthusiasts" because they don't rent a cart? That is a huge market you are dropping if you ask me.
by your market division, there is already a strong emerged market of SERIOUS Pro shooters that you segment as "non pro enthusiasts".
I actually DO LOVE C1, if my passion for it hasn't rang through in posts...let this clearly affirm that. It is the reason I post.
The commercialized marketing world we live in makes it hard when there are "experts" in so many departments of launching a sw product when real-world situations doesn't embrace the product.
I think the scope of people in this situation is heavily underestimated.
In Marketing for "off the shelf" products, they have a saying that goes something like...."For every voice you hear feedback from, there is a good 80% that have already walked the other way".
Doug, you have been instrumental in providing so much support and guidance, and that is something I am thankful for, and surely others. I do hope here and in email to hear your thoughts.
-
I just wish some big shot in C1 is reading and thinking..."Well how hard can it be to make a DB or ProLite version without all this session/catalog/extras, and keep the 3.7 method? We had it before!" ..And this big shot takes 3.7 off the dusty shelf and merges all the "good" tools (I am willing to consult with others in a group regarding priority tools) the sw engineers strip it down, and make it Bruce Lee, not Andre-the-Giant :-) (two of my favs in different ways).
You understand that C1v3 on the Mac used sessions as its only workflow organization framework right? The windows version of C1v3 was a very very small part of the market for C1.
-
As someone who has used Capture One since the 3.x days, I find myself looking at Vr 7 with a positive. Since Vr 4.x came out I have been a session user and really don't find it that bad. I would actually prefer LR using a session workflow or at least offering one instead of the Catalog.
Areas I feel are value of consideration for a photographer would be.
1. If you shoot with a tech camera on a Phase back, the Capture One workflow is very good. It took me a few day's to figure out the new workflow in 7 for processing a LCC, but once you work with it a bit it just fits the workflow of the rest of the software.
2. Processing engine, if you haven't tried it, you have to try it to believe it. I find myself going back to older P45+ files and reworking them. The newer engine can pull out even more details and has a much better handle on noise. On the IQ files results are excellent also.
3. Local adjustments, greatly improved over VR 6, as you now have the ability to have more than 5 levels. I would love to have a fade opacity fade feature here . You can fade the brush opacity which works in the same way. But you have to remember you faded the brush opacity. If you go and create a new local adjustment the brush keeps the opacity from the previous setting.
4. Color adjustments, very nice workflow here too. You have the ability to make a global selection/change by color or you can do the same thing in a local adjustment layer and it will only effect the color in the area selected. On a typical image for me this comes becomes very important since many times when working on a blue sky, you can effect other areas in a image that you really didn't mean to effect. In LR you have the color sliders, but as I understand them, they always work on 100% of the image. They are no longer available when you are working under a selection mask in LR.
5. Side by side view. I love and hate this in Capture One. You still can't make a selection outside of the numeral sequence for side by side. So when working a nodal pano this is OK, but if you are working on a tech camera setup, where I usually shoot the center image first, then the files are out of order for Capture one. In good old 3.8 you put the boxes up there click on one to select it as active then clicked on a image in the filmstrip. You could determine the order. This still has not bee addressed in Capt 7. Still the side by side in Capture 7 loads faster and once loaded it's easier to move around the images than with LR. In LR, I still get confused with trying to do a side by side view comparison and with D800 files it really bogs down. I think it's the fact I am using a 30" monitor and for some reason LR has trouble with a 30" monitor when you have LR viewed at 100%.
6. To me it's very key that Phase makes such a strong piece of software, as when I look at what Canon has offered for the past 6 years, and now Nikon both offer much less flexibility. Phase allows a user of a DB to use the software free and you have to pay to use the pro version. As I have kept up with the upgrades, the 99.00 charge to get to 7 was well worth it. My main issue right now when working with D800 files in Capture 7, is getting good color profile to start with. LR is a bit better here, but still the 800e needs work IMO. I feel that Phase One did a better job on the D800 default profile than the one for the 800e and I do hope that this might get fixed later on.
Negatives, I have a few: All minor
1. No history, long overdue and I had hoped we would see this in 7 when working multiple files you can get lost fast using "edit-undo"
2. No ability to make a color temperature adjustment in a local adjustment only on the main image (LR allows this and it can come in handy)
3. No ability to force a side by side view
4. No ability to have noise reduction in a local adjustment. This slider was visible in 6 but not active, I had assumed it would become live in 7, but now its gone.
As so many others have stated. You get 60 day's to try it. It's well worth giving it a look.
Paul
-
...Since Vr 4.x came out I have been a session user and really don't find it that bad....
I think I'm the only user that can't stand how sessions work :)
When I get home from a job, I download all the images to my HD. If you use sessions, C1 creates another folder inside your folder (and usually ends up having the same name as the main folder). In order to avoid that, there is some convoluted method that I was told by a C1 instructor. It's so "easy" that I couldn't remember 2 minutes after I was told.
Phase, not everybody works tethered or imports from a card ???
-
I think I'm the only user that can't stand how sessions work :)
When I get home from a job, I download all the images to my HD. If you use sessions, C1 creates another folder inside your folder (and usually ends up having the same name as the main folder). In order to avoid that, there is some convoluted method that I was told by a C1 instructor. It's so "easy" that I couldn't remember 2 minutes after I was told.
Phase, not everybody works tethered or imports from a card ???
1. Create a C1 session.
2. Drag the raw files into the capture folder from wherever you initially downloaded them.
3. There is no third step.
-
5. Side by side view. I love and hate this in Capture One. You still can't make a selection outside of the numeral sequence for side by side. So when working a nodal pano this is OK, but if you are working on a tech camera setup, where I usually shoot the center image first, then the files are out of order for Capture one. In good old 3.8 you put the boxes up there click on one to select it as active then clicked on a image in the filmstrip. You could determine the order.
On the other hand v3 you could only view 2 images (or was it 4? it's been years since I opened it). In v4-7 you can view up to 12 images.
Also in v3 you couldn't actually zoom in on the image in the main window, only in the "focus" tool.
In v7 you can rearrange the order of the thumbnails which can function as a stand in for the functionality you are asking for. I think it's unlikely you'll see them add any functionality to change the order of the preview images to be different than the order of the thumbnails - at least not anytime soon.
-
1. Create a C1 session.
2. Drag the raw files into the capture folder from wherever you initially downloaded them.
3. There is no third step.
But, that's the thing. I create a folder specific for the job. For the example sake, name it Doug Portrait. When I create the session, it prompts you for the name and location. If I select the folder where the images are (Doug Portrait), it will create another folder inside Doug Portrait. Now I have: "Doug Portrait - Doug Portrait - all the files" instead of "Doug Portrait - all the files"
The instructor said a way that's possible without having the extra folder (involved dragging files around as well), but I don't remember how.
The elegant method (and common sense) would be to create the session and let you pick the folder or create a new one if you need.
-
Doug:
Thanks for the tip, how do you change the order? that would work fine. I am assuming you can move 3 or 4 around, by dragging them while in the grid but I can't figure out to move them.
Oops I got it, I wasn't dragging far enough, you have to get to the orange line.
This works fine as a work around.
Paul
-
Jean, that is what I mean. it just does things that defy logic. Why does it make a redundat file? Actually I don't want to know why. It simply shouldn't. You are not alone at all. Plenty people to this day STILL love how there was none of this to deal with. I don't see how it ISN'T enlightening to be free of it all. I guess some really don't know what they don't know :-)
Doug_
Yes, I guess 10 years ago, MAC's were a bit more mainstream. So was my velvia on a Sinar.
If you look at users in the past 4 years you will see the PC imaging market far outweighs MAC users in many large sectors of the image making photographic including LR users(If that is a some gauge).
It took a spike in the 64bit win7 OS more recently as well. I know all the digitcarts come with MAc G's. Perhaps re evaluation of market is in need.
I'm still wanting to hear if a different version is something C1 has thought of. Think of it this way. If this new direction is totally right. Then make the ProLite version as DB standard without all the Sessions and Catlaog etc. So anyone wanting to upgrade with V7 or future have to pay, and all DB owners with free updates get the ProLite. It already is out of the spectrum of what a DB purchaser should expect. The developer, not a forced DAM "sollution".
thoughts?
-
You could ask the opposite question. Why use lightroom instead of capture 1?
I have no need for a searchable keyworded archive database and despite having a free copy of Lightroom I haven't even bothered to install it.
Capture 1 is easy to use once you got over the learning curve bump between 3 and 4 and produces great files, I can't see the point in changing tethering/processing software when it does everything I need (and a load of other stuff I don't need)
-
But, that's the thing. I create a folder specific for the job. For the example sake, name it Doug Portrait. When I create the session, it prompts you for the name and location. If I select the folder where the images are (Doug Portrait), it will create another folder inside Doug Portrait. Now I have: "Doug Portrait - Doug Portrait - all the files" instead of "Doug Portrait - all the files"
The instructor said a way that's possible without having the extra folder (involved dragging files around as well), but I don't remember how.
The elegant method (and common sense) would be to create the session and let you pick the folder or create a new one if you need.
You don't need to create the main folder of the session. C1 handles it. Let's say you have a folder called /jobs/ In the new session dialog you point C1 to that folder (it will remember it for next time), call the session "Doug Portrait" and it creates /jobs/Doug Portrait/Captures and the other folders like Selects, Output, Trash etc. Then you drop your images in from wherever they are stored.
I find operating in sessions works best for me. Fiddled with the catalog in 7, but don't really see a use for it in my work that tends to be project based.
-
I love C1 for it's "analogue" look. Period.
But the catalogue feature is probably the most silly idea Phase One could have come up with.
Due to C1's color management system it will NEVER work as expected (because technically it CAN NOT work).
I guess we will see hundreds (or thousands) of users who will complain... "my processed TIFs look different in C1 than in Photoshop" ... or: "C1 doesn't show my Photoshop adjustments" ... or: "in C1 my TIFs are desaturated" or so ...
"The spirits that I called up" ... (if this is the accurate translation for the German saying: "Die Geister die ich rief.")
I'm with "Phil Indeblanc" ... C1 should focus on fast workflow and RAW processing. All the latest additions to the software are pretty much useless (except - of course - the new engine, which is simply great. Really great!).
-
I'm with "Phil Indeblanc"
-tho mas.
So is MrSmith and Craig for the most part. They are more willing to ignore parts and be optimistic :-)
Deep down inside, so is Doug :-)
regarding the folder creation...It shouldn't try and think for you to create it what it thinks it needs.
to further clarify...
For the re evaluation, I am refering to overall consideration of market. Digitech carts should still roll out with MACs unless requested (I don't know of any that provides a PC).
-
...call the session "Doug Portrait" and it creates /jobs/Doug Portrait/Captures and the other folders like Selects, Output, Trash etc. Then you drop your images in from wherever they are stored.
...
Craig, you outlined how it works. I don't understand how it seems logic to create a folder then C1 creates another folder and then I drag the images to the folder created by C1. How about doing it the logical way: create a folder and then C1 uses that folder instead of creating another one. And I'm not saying just do it my way. Just make it an option: create a folder or don't create folder (just like it gives you the option to use tethered or untethered).
The way it works now it's the approach as if somebody shoots tethered with a back. Well, the Pro version is aimed at professionals that use a variety of camera systems.
-
You could ask the opposite question. Why use lightroom instead of capture 1?...
It all depends on what type of photography you do. For commercial/fashion work, C1 has features that makes your life easier. For event work (weddings), LR has a MUCH better workflow. And until v7 (when they improved the algorithm), LR had much better highlight recovery. I don't use LR because it uses a catalog, I use it because it's a breeze to use for event work. Also, C1 was notorious for not getting updates that supported the new cameras out in time.
No matter how much I customized C1 interface, I fly through a job when using LR (I used to fly through a job prior to v4).
-
Deep down inside, so is Doug :-)
yes, I know ;-)
regarding the folder creation...It shouldn't try and think for you to create it what it thinks it needs.
not sure what you are referring to herewith (maybe due to language barriers). I have absolutely no trouble with sessions and the way C1 handles sessions and the respective folder creation. In fact I am absolutely familar with sessions and I've also adotped my archiving/back-up system to profit from C1's session struture. I like it. Or at least: I am accustomed to work with it.
Sessions have always been a fundamental part of C1 ... also in V3. Maybe you have not noticed you are working in a session ... but in fact you always did exactly that.
I think Phase should be proud of their C1 software. They should focus on their own strengths (RAW handling, color, color editor, smoothness, "film look", tethering...). I absolutely do NOT think they should copy Lightroom ... because there is absolutely NO way they will win the race.
But lately I am under the impression they try exactly that... unfortunately.
-
Basically I never had any strange color problems with C1, ever. While LR4 is really good and has finally a RAW engine that is very good, I still have the on and off color cast issues that I never see with C1.
Until C1 v7, LR4 had two major features that where not there or in bad shape, that was Lens calibration and highlight recovery. With C1 v7 the highlight recovery is almost at the same level as LR4 and they included a lot of lenses with proper distortion removal, etc.
The one thing I truly miss in LR4 is a proper keystone correction, this is something that I use a lot in C1 v7.
Furthermore I like the detail color selection for manipulation more than the general selection you can do in LR4, plus it seems C1 lets me go more "wild" with how much I tweak colors.
What I also like in C1 are the Levels tools where I can "crop" the not used areas in a histogram. Similar thing can be done in LR4, but not in the same easy way I think.
What C1 had missing until v7 was DAM. Although it has now a catalogue, it is nothing what LR4 has. LR4 is just way better because it had that implemented since the first version. Easy tagging of keywords, maps, etc. This is just something that I utterly miss in C1 and where I do make heavy use of sidecar files to sync data from LR4 to C1 before I develop the RAW files in C1.
Although PhaseOne has a stand alone DAM tool called MediaPro, I never really liked it.
BTW, both have a huge gap in any good documentation. There are a lot of things in both programs that are just not or not enough documented in their "documentation".
Hi Gullevek,
Can you expand on this a little...
'What C1 had missing until v7 was DAM. Although it has now a catalogue, it is nothing what LR4 has'
What do you feel we are missing? I can mention of course that we can do many things in a Catalog that lightroom cannot do. For example, Shared Catalogs, Adjusting Images that are 'offline' and working with multiple catalogs at once. Or just the simple fact that you don't have to relaunch the application, simply to switch to another catalog!
Documentation-wise, incase you haven't seen it, we have...
www.help.phaseone.com
http://www.youtube.com/user/PhaseOneDK?feature=results_main
http://www.phaseone.com/en/SupportMain.aspx
David
-
Craig, you outlined how it works. I don't understand how it seems logic to create a folder then C1 creates another folder and then I drag the images to the folder created by C1. How about doing it the logical way: create a folder and then C1 uses that folder instead of creating another one. And I'm not saying just do it my way. Just make it an option: create a folder or don't create folder (just like it gives you the option to use tethered or untethered).
The way it works now it's the approach as if somebody shoots tethered with a back. Well, the Pro version is aimed at professionals that use a variety of camera systems.
Perhaps as a long time user I'm simply used to thinking of jobs that go in this order: Create the project (session), add images to the session, work on them, process and then work on the output in photoshop.
In a project oriented environment like many working photographers operate, this makes perfect sense because it tends to keep things organized by client/job and in one place, making backup and portability a cinch.
I don't know enough about the cataloging feature to say whether or not it addresses the limitations of sessions adequately, but I'm pretty satisfied with the simple organization sessions provide.
-
Perhaps as a long time user I'm simply used to thinking of jobs that go in this order: Create the project (session), add images to the session, work on them, process and then work on the output in photoshop. ...
Again, my problem is not the project approach. Is the extra step involved: moving images from a place on your hard drive inside the session folder. In the create session window, it should have another check mark/drop down: use current location (of the images) or create a new folder.
If you are importing from a card or shooting tethered, creating the folder makes sense. If you are coming from a job and copied your images on your hard drive, creating an extra folder doesn't make sense.
I too work with the way it is because I don't have a choice, but it doesn't make any sense whatsoever the way it is setup. I doubt I'm the only one that thinks that and I wish the users would send feedback to Phase. I'm sure this is a carryover from their backs when most people shot tethered (and it makes sense that way). The problem is that this is the Pro version which is supposed to cater to many types of users, not just ones that shoot tethered.
-
Again, my problem is not the project approach. Is the extra step involved: moving images from a place on your hard drive inside the session folder. In the create session window, it should have another check mark/drop down: use current location (of the images) or create a new folder.
If you are importing from a card or shooting tethered, creating the folder makes sense. If you are coming from a job and copied your images on your hard drive, creating an extra folder doesn't make sense.
I too work with the way it is because I don't have a choice, but it doesn't make any sense whatsoever the way it is setup. I doubt I'm the only one that thinks that and I wish the users would send feedback to Phase. I'm sure this is a carryover from their backs when most people shot tethered (and it makes sense that way). The problem is that this is the Pro version which is supposed to cater to many types of users, not just ones that shoot tethered.
Where do your images originally come from if not from card (or external hard drive, etc) or tethered? I always create a session before doing anything and then drop the take, wherever it came from, directly into Captures. If you want to avoid this for some reason, you can create a "session favorite" (in the library tab) that points to your folder(s) of images.
Many project-oriented software work this way. Video editing comes to mind... you create the project, then add the assets.
-
Where do your images originally come from if not from card (or external hard drive, etc) or tethered?....
They do come from cards originally. I just don't import them via C1. I have a multi-card reader and download images on my hard drive. Since I use both LR and C1, I don't want to create sessions if I don't end up using C1 for a particular job. That creates a problem since C1 creates a folder when you use sessions. If you ONLY use C1, then yes, you can create the session first and then dump the images inside the folder (although, that's a workaround not an elegant way of doing things since I'm forced to start C1 just to create a damn folder).
-
They do come from cards originally. I just don't import them via C1. I have a multi-card reader and download images on my hard drive. Since I use both LR and C1, I don't want to create sessions if I don't end up using C1 for a particular job. That creates a problem since C1 creates a folder when you use sessions. If you ONLY use C1, then yes, you can create the session first and then dump the images inside the folder (although, that's a workaround not an elegant way of doing things since I'm forced to start C1 just to create a damn folder).
DING DING DING!!! Exactly!!
I certainly don't use the raw dev to import images. I would recommend it for someone just starting out who just purchased their $1200 Costco DSLR with 3 light camera kit. It would be a good start to rely on one app for all image related task. I recommend a 1TB NAS for them for back up etc as well.
BUT certainly not for anyone taking full control of their work, or work from multiple cards and shooters. Come on! Raw Dev to ingest? ( I tried even LightRoom for a bit, which looks intuitive, but no thanks) Maybe for the hobbiest or the occasional fine artist that wants to make a cup of drip coffee while doing it..
_Culling ... ingesting is the job of a FAST DAM app that sees all files with a bunch of its data clearly with number of features to organize. tag metadata, move around folders.... PERIOD. "
OFTEN, I have a 32GB card that I have more than one client shoot in a day, and I don't use ONE shiny idealistic Session folder. I have 3 or 4, and I want the files in their specific folders...With ACDSee you can command such demands! By date, by individual selection to multiple locations. That's FLEXIBILITY! Thats cuz its a DAM DAM! I can't really rave about the Raw dev it comes with. But guess what? You can buy just the manager that DOESN'T come with the raw. Hmm what a novel idea! Separate apps for different users. Separate the Raw/Dev portion from the Manage....genius!
" Today we'll discuss how you can use Capture One to do all your photographic steps as you transfer, process, and archive All your data within one applications ...if you use it the right way..." Really Peter? :-) BTW, I love Peter, and his work is just bliss. Besides, a great voice for instruction that I've enjoyed over the years!
He has a great blog as well....Really amazing chap. Maybe in half effort manner you can do everything in C1, but Why would you?! Why?! Perhaps you're a digitech? OK, fantastic. You go!
What makes a professional a professional is having invested in the right tools for the right job. Use DAM to organize and Developer to process RAW.
Would you use a 1-2/ps frame camera for a fast paced model shoot with NO final image direction? NO! Would you use a point and shoot for Cartiers next ad? No!
Why would you Catalog your image library and LOCK in all your images/image data to one program? You wouldn't. And yes, C1 lets you use Sessions...great.....At least make it user friendly by being simple. Stop making unnecessary folders!
.....You say this is common an many raw developers? Would you say it is common for Major cataloging houses, Agencies, publications, editors, and studios use a DAM application? Yes or no? Thank you!
I had a job I developed today in C1 and it just does a BEAUTIFUL processing job....come on guys, this is torture.
Give the digitechs thier version since you trained the hell out of them on how to think, but give the rest of the people a choice to be free. As free as 3.7.10 is enough for me.
In a project oriented environment like many working photographers operate, this makes perfect sense because it tends to keep things organized by client/job and in one place, making backup and portability a cinch.
_Why would C1 decide when that folder is made? Just because I shoot into it or transfer into it via C1? C1 is not my only app on a clients job. (This is what I mean tho-mas)
I always create a session before doing anything and then drop the take, wherever it came from, directly into Captures.
_You create a session before getting all the info, which often will have samples of things they like, or the job focus?
If you want to avoid this for some reason, you can create a "session favorite" (in the library tab) that points to your folder(s) of images.
_I'm gonna have to look at this again, as I remember using it at some point.
Many project-oriented software work this way. Video editing comes to mind... you create the project, then add the assets.
_Can you make a list besides "many"? thanks.
As far as clients folders....
I already have the clients folder created with their sample images they forward and have discussions for the project before I shoot. As I said, I understand the 1 time it is good when the Digitech will create this folder to hand off. Is that all C1's big picture approach is all about?
How hard is it for a digitech to do without that? Not hard at all. It can be done without the steps. It would keep things from making a mess. Get rid of this and we can ignore Sessions and Catalog with better ease. Since most people 99.9% try to anyway.
I highly recommend C1 to prompt us if we want it to create C1/Cache/Settings subfolders to areas we simply browse. I have NO intention of dong anything in a folder I browsed in. If Sessions is so simple and just like a SysFolder browser, then let me do just that without added files to clean after.
(take the above in a fun tone, but the reality is there.)
-
Hi,
My take on the issue is that Lightroom is a workflow solution while Capture One used to be a raw converter. I'm not really sure where Capture One is going.
I know that Luminous landscape has a tutorial video about Capture One, I have not bought it as I decided not to use Capture One. The reason I don't use C1 is not because there is anything wrong with C1, but that I'm in the LR camp, since LR1.0 Beta 3.
I would strongly suggest you buy the LuLa video, they used to be excellent. I'm pretty sure that C1 is evolving into a workflow solution, and I'm pretty sure that the LuLa video would give you much more information than playing with a demo for two months.
Best regards
Erik
Since entering the realm of digital photography I've always used Lightroom - I shoot Canon full frame DSLR. Is there a difference or advantage to using Capture One rather than Lightroom?
-
I would strongly suggest you buy the LuLa video, they used to be excellent. I'm pretty sure that C1 is evolving into a workflow solution, and I'm pretty sure that the LuLa video would give you much more information than playing with a demo for two months.
As it relates to C1 7.x, I'm not so sure...the C1 LuLa vids are dated (pre 6 as I recall, they came out just before C1 6 was released–which caused a bit of, uh, discontent in certain camps). The LR 4.x vids are indeed current (and useful for learning LR 4.x)...
I've not yet downloaded C1 7.x because, well, I haven't had the time nor inclination (prolly wait till C1 7.2/3 because I'm "chicken"). I really only use C1 for tethering to my 645 with IQ 180 camera...
So, I can't really comment on C1 7.x's asset management aspects–I'm willing to accept (and believe) that C1 7.x has substantially improved a lot of aspects of IQ (image quality) because, well, Phase One had to (due to the bar being raised by LR 4.x/ACR 7.x).
That's the part I really like (and encourage) is the drive to improve the processing of raw to rendered images–I do wish C1 would stay more current on DNG output versions though. The whole lossy DNG seems to have passed C1 7 by.
-
_Why would C1 decide when that folder is made? Just because I shoot into it or transfer into it via C1? C1 is not my only app on a clients job. (This is what I mean tho-mas)
okay, I've got it.
Within a session you can assign ANY folder on your system (either on an internal or external drive) as "capture" folder, as "selects" folder, as "trash" folder and as "output" folder. Likewise you can have hundreds of sessions (think of "projects"/"shooting sessions") and assign for instance the very same "output" folder to all that sessions so that all your exports go into this "global" export folder.
In the "Library" you can select ANY folder on your system and make it a session "favorite" ... which is basically a "capture" folder in an untethered session (or to keep it more simple: it's simply the folder your captures reside in ... either way where they come from). Of course you can make several (capture-) folders session favorites so that you can work on captures from different locations (actually you don't even have to make it a "favorite" - you can just point to the respective folder in C1's library. But making a folder a "favorite" will create a link in C1's library under "Session Favorites" so that you will easily find the respective folder in this list when you re-open the session).
You can also move and/or copy captures from one session to another in C1's library ...
You can also create new folders in C1's library and move captures into it.
So basically you can choose your workflow by your liking. You don't have to import through C1's import tool neither you have to use the folders C1 creates automatically.
The only thing you have to live with is that C1 is creating at least 3 folders when you make a new session by default: "trash", "select" and "output" (and a "capture" folder in case of creating a "tethered" session). But again, you don't have to use these folders. And if you don't use them you can also delete them if you like to. C1 will then display a warning that the respective folders are missing (a triangle with an exclamation mark - see attachment)... but you can ignore this warning.
This way you work around the way C1 is designed ... but it's easily doable.