Luminous Landscape Forum

Equipment & Techniques => Motion & Video => Topic started by: jsch on March 14, 2012, 04:26:13 pm

Title: System Requirements on OSX for REDCINE-X PROFESSIONAL V 11.0.0 OSX
Post by: jsch on March 14, 2012, 04:26:13 pm
Hi,

to learn something I downloaded and installed REDCINE-X PROFESSIONAL (Beta Version) V 11.0.0 for OSX on my MacBookPro (2.33 GHz Intel Core 2 Duo 3GB 10.5.8). If I start the program it crashes insantly. What I couldn't find were the system requirements for this software.

Is my system not up to the software? Or should the software at least start up? I attached the crash report below.

Thank you,
Best,
Johannes


Process:         REDCINE-X PRO [320]
Path:            /Applications/REDCINE-X PRO.app/Contents/MacOS/REDCINE-X PRO
Identifier:      com.red.RedCineX
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process:  launchd [117]

Interval Since Last Report:          1690604 sec
Crashes Since Last Report:           85
Per-App Interval Since Last Report:  0 sec
Per-App Crashes Since Last Report:   7

Date/Time:       2012-03-14 21:08:58.256 +0100
OS Version:      Mac OS X 10.5.8 (9L30)
Report Version:  6
Anonymous UUID:  DA524D88-07FC-4C5D-BCA0-D1CA9D47B4B8

Exception Type:  EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread:  0

Dyld Error Message:
  Symbol not found: __ZNKSt13bad_exception4whatEv
  Referenced from: /Applications/REDCINE-X PRO.app/Contents/MacOS/REDCINE-X PRO
  Expected in: /usr/lib/libstdc++.6.dylib
Title: Re: System Requirements on OSX for REDCINE-X PROFESSIONAL V 11.0.0 OSX
Post by: fredjeang on March 14, 2012, 05:59:36 pm
I had a similar issue on Windows, could solve it.

Maybe it has the same solution, who knows.
It was comented on Redusers.

check here: http://www.luminous-landscape.com/forum/index.php?topic=62556.0

Best luck
Title: Re: System Requirements on OSX for REDCINE-X PROFESSIONAL V 11.0.0 OSX
Post by: ChristopherBarrett on March 15, 2012, 11:23:43 am
Weirdness.  Runs fine on my 2010 17" MBP as well as my current generation tower.  Never crashes or hangs.
Title: Re: System Requirements on OSX for REDCINE-X PROFESSIONAL V 11.0.0 OSX
Post by: ftbt on March 17, 2012, 10:13:05 am
Try Beta 12. It just came out. Supposedly it fixed an issue where REDCINE-X PRO would crash OSX 10.5.X.
Title: Re: System Requirements on OSX for REDCINE-X PROFESSIONAL V 11.0.0 OSX
Post by: bcooter on March 17, 2012, 08:27:29 pm
Weirdness.  Runs fine on my 2010 17" MBP as well as my current generation tower.  Never crashes or hangs.

Same here.

Been running it on three separate towers, 1 I-mac, two thunderbold powerbooks.  No problems.

All running snow leopard.

IMO

BC

P.S.  Makes sure your system is clean and you have tons of drive space, lots of Ram and update your system with the latest Java.

On our mac towers, for grading I routinely run Cinex pro, FCP7 and Apple Color all at once and can do it for about 8 hours until I get that bogged down feeling like's it's gonna crash.

Make sure all your scratch disks in FCP and Apple Color are set to open disks with a lot of room if you go this route.

Title: Re: System Requirements on OSX for REDCINE-X PROFESSIONAL V 11.0.0 OSX
Post by: fredjeang on March 18, 2012, 05:32:09 pm
Beta 12.

Now yes!
Title: Re: System Requirements on OSX for REDCINE-X PROFESSIONAL V 11.0.0 OSX
Post by: Thomas Editions on April 06, 2012, 04:49:52 am
I wrote an article that was published in Creative Cow last week.  Check it out, I talk about the system I use, http://forums.creativecow.net/thread/296/17690#17717


Von