Luminous Landscape Forum

Raw & Post Processing, Printing => Colour Management => Topic started by: bortbox on January 28, 2012, 10:21:18 am

Title: Big Favor - Isis Measurement File
Post by: bortbox on January 28, 2012, 10:21:18 am
Hello!

I am hoping someone out there would be kind enough to help me out:

I am looking for a sample measurement file generated from an Isis, no-uv, CMYK target. CGATS format preferred, but I am not picky as long as it is readable plain-text. Number of patches, the software used to generate the patches, and the software used to read them isn't important however it would be nice if someone would let me know how the measurement was taken.

I have some mystery measurement data, and I am pretty sure that it was made with an Isis and this information would sure help.

Thanks in advance!
Title: Re: Big Favor - Isis Measurement File
Post by: yannb on January 28, 2012, 10:34:34 am
Hello,

Below is a measurements file. The software interfacing with the iSis was Measuretool. Exported data is UV inclusive (aka 'NO filter').

Regards,
Yann
Title: Re: Big Favor - Isis Measurement File
Post by: bortbox on January 28, 2012, 10:39:01 am
Yann,

Much appreciated, however it looks like it might not have attached correctly (showing 0kb, file is blank). Do you have any measurements sans-uv?
Title: Re: Big Favor - Isis Measurement File
Post by: yannb on January 29, 2012, 08:54:40 am
Hello,

Sorry about the error. Here is a new attempt.

Regards,
Yann
Title: Re: Big Favor - Isis Measurement File
Post by: Ethan_Hansen on February 10, 2012, 07:02:30 pm
If the file is CGATS format, open it and look at the header information. MeasureTool-generated files will have an "iSis_INFO" field in the first few lines while i1Profiler puts in 'INSTRUMENTATION "i1iSis"' if the measurement was made on an iSis.