Luminous Landscape Forum

Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: aaronchan on November 17, 2010, 11:54:33 pm

Title: Vertical Banding on Z6100
Post by: aaronchan on November 17, 2010, 11:54:33 pm

I'm printing a 1.5m x 1.2m image and I realized there are vertical banding under Windows 7 + PS CS5. Now I'm printing the image by submitting the image directly to HP Color Utility Center, and the vertical banding is gone. I believe this is costed by the printer driver since I am bypassing their driver to print. Does anyone have any exp. on this problem before?

Thanks
Aaron

Title: Re: Vertical Banding on Z6100
Post by: Ernst Dinkla on November 19, 2010, 03:01:26 am

No experience with the Z6100 but if it is that critical it could well be a slight misalignment of the heads. Do a heads realignment but first clean the rod the head carriage runs on and oil it with the prescribed oil.  That head has to run fast. I have done the same on a Z3100 and Z3200 when I noticed a small vertical misalignment.


met vriendelijke groeten, Ernst Dinkla

Try: http://groups.yahoo.com/group/Wide_Inkjet_Printers/