Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: vertigoestudio on September 02, 2009, 10:33:58 am
-
Hy everybody;
I bought this second hand generator, is quite old about 20 years.
It works perfectly connected to the electric network, but doesn´t charge the battery,
I think doing something wrong. Someone has used it, know how it works or have the manual?
This is the model.
(http://img168.imageshack.us/img168/4281/7293401.jpg) (http://img168.imageshack.us/i/7293401.jpg/)
Thank you very much.
-
Hy everybody;
I bought this second hand generator, is quite old about 20 years.
It works perfectly connected to the electric network, but doesn´t charge the battery,
I think doing something wrong. Someone has used it, know how it works or have the manual?
This is the model.
(http://img168.imageshack.us/img168/4281/7293401.jpg) (http://img168.imageshack.us/i/7293401.jpg/)
Thank you very much.
Hi,
I suppose you might have found out meanwhile, if still needed try to get a manual at Briese www.briese-lichttechnik.de they should be able to provide a pdf or something similar. It´s a simple workhorse pack which is not very complicated to use. Outlet 1 and 2 are symmetric, outlet 3 provides a fixed asymmetry (less power, shorter flash duration, faster recycling). Each dot for the power setting is a 1/4 stop, the red dots mark a full f-stop. You have On/Off, prop modeling light, cell and open flash, that´s it.
As far as I know there is no battery to charge, this is a mains only unit though it´s called location.
Cheers, Ulf